20-273MM Desktop Electric Pipe Cutting Machine, Galvanized Pipe Cutting Machine, 325 Gas Cylinder Pipe Cutting Machine

Sales Phone: 189-0537-7135, Manager Li

Basic Uses and Models of Pipe Cutting Machines:

Cutting machines are used for galvanized steel pipes, plastic-lined pipes, spiral pipes, and uncoated pipes.Pipe cutting for steel pipes, used in pipeline construction and water supply treatment for fire protection, construction, water supply mining, coal mines, etc.Cutting Machine Usage and Precautions: Place the cutting machine on a level surface and adjust according to the diameter of the tube.Adjust the height of the bracket slightly. If the pipe is too heavy, it is recommended to directly drill rivets into the foundation and securely fasten the cutting pipe.Machine to prevent the cutting machine from moving during the cutting process. Place the steel pipe on the cutting machine according to the thickness of the pipe.on the different rollers (tubes 100mm and under should be placed on the two rollers inside the cutting machine)Do not continuously press the handle of the slow-pressure oil pump. Press the handle once, and the blade will move downward approximately 0.5mm.Rotate the steel pipe once, then press. When the blade is about 1/2 more into the steel pipe, no further pressing is needed.After allowing the steel pipe to rotate a few times, it naturally breaks.