76-273MM Electric Hydraulic Pipe Cutting Machine, Plastic Coated Pipe Cutting Machine, Steel and Galvanized Pipe Cutting Machine

Sales Phone: 189-0537-7135, Manager Li

Basic Uses and Models of Pipe Cutting Machines:

Pipe cutting machines are used for galvanized steel pipes, plastic-lined pipes, spiral pipes, and other general steel pipes.Cutting of steel pipes for use in pipeline construction and water supply treatment for fire protection, construction, water supply, mining, coal mines, etc.Pipe cutting machine usage and precautions: Place the pipe cutting machine on a level surface and adjust according to the diameter of the pipe.Adjust the height of the bracket slightly. If the pipe is too heavy, it is recommended to directly drill rivet holes in the foundation and securely fasten the cutting pipe.Machine, to prevent the cutting machine from moving during the cutting process. According to the thickness of the steel pipe, place the steel pipe on the cutting machineOn different rollers (tubes with a diameter of 100mm and below should be placed on the two inner rollers of the cutting machine)Do not continuously press the handle of the slow-down oil pump. Press the handle once, and the blade will move downward approximately 0.5mm.Rotate the steel pipe once, then press. When the blade is about 1/2 more into the steel pipe, no further pressing is needed.After allowing the steel pipe to rotate a few times, it naturally breaks.