Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freezing vessels, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory areas on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineering and technical staff and 82 middle-level technical personnel. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Current biomass boilers encounter the following issues in practical application:
Fuel supply instability: The supply of biomass fuel is subject to seasonal and regional limitations, leading to unstable fuel supply for biomass boilers. This may result in the inability of biomass boilers to operate continuously or necessitate frequent fuel switching, increasing operational costs and management challenges.
Inefficient combustion: Due to the characteristics of biomass fuel and the complexity of the combustion process, the combustion efficiency of biomass boilers is relatively low. Some fuels have high volatile and ash content, which may lead to excessive ash and particulate matter during combustion, thereby reducing combustion efficiency and heat energy utilization.
NOx Emission Issue: Biomass boilers produce a high amount of nitrogen oxides (NOx) during the combustion process, which has a certain impact on the environment. Controlling and reducing NOx emissions is an important issue for biomass boilers.
Combustion Equipment Wear: High ash content in biomass fuel can cause wear and clogging of the combustion equipment during the burning process. This may lead to reduced equipment lifespan and necessitate frequent maintenance and cleaning.
Ash residue from combustion: Ash residue from biomass boiler combustion must be treated and disposed of properly. Improper handling may lead to environmental pollution and harm.
Lack of unified technical standards and specifications: Currently, there is a lack of unified technical standards and specifications for biomass boilers.

A biomass organic heat carrier boiler is a boiler equipment that utilizes biomass as fuel to transfer heat energy through an organic heat carrier. Compared to traditional steam boilers, biomass organic heat carrier boilers have the following performance advantages:
High thermal efficiency: The biomass organic heat carrier boiler utilizes organic heat carriers as the heat transfer medium, offering high heat transfer efficiency. Organic heat carriers can achieve liquid-phase heat transfer at low temperatures, resulting in minimal heat loss and enabling more effective utilization of fuel's thermal energy, thereby enhancing thermal efficiency.
Flexibility: The biomass organic heat carrier boiler is suitable for various biomass fuels, such as wood chips, straw, etc. Due to the abundance of biomass resources, different biomass fuels can be chosen according to actual conditions, enhancing the substitutability and flexibility of the fuel.
Environmental Protection: The biomass organic heat carrier furnace produces relatively little waste gas and slag during the combustion process, with low emissions of pollutants. The biomass fuel itself has low nitrogen characteristics, and the slag after combustion can be reused as organic fertilizer or biomass fuel, reducing environmental pollution.
Safety: The biomass organic thermal carrier boiler uses organic thermal carriers as heat transfer mediums, featuring lower working pressure, thereby reducing safety risks during boiler operation. Additionally, biomass fuel has a lower risk of explosion and fire during combustion compared to fossil fuels.
Renewability: Biomass organic heat carrier boilers use biomass as fuel, a resource with renewability that can be continuously replenished through cultivation. Compared to fossil fuels, the use of biomass fuel has a smaller environmental impact, benefiting sustainable development.

Biomass refers to renewable energy sources derived from organic materials such as plants, animals, and microorganisms. This includes wood, straw, waste crops, food scraps, and municipal solid waste, among others. Biomass has a wide range of sources and types and is a renewable energy that can substitute for fossil fuels.
A biomass boiler is a specialized equipment designed for burning biomass fuel. It combusts biomass fuel to generate high-pressure, high-temperature thermal energy, which is used for heating, power generation, or other industrial processes. Biomass boilers typically use granular, pelletized, or chipped biomass fuels, releasing thermal energy through the combustion process.
The advantages of biomass boilers include:
Renewable Energy: Biomass is a renewable energy source with lower carbon emissions and environmental impact compared to fossil fuels.
Diversity: A wide variety of biomass fuels are available, utilizing plant and animal waste and by-products to enhance resource utilization efficiency.
Environmental friendliness: The carbon dioxide produced during biomass combustion can be absorbed by plants, forming a cycle and reducing air pollution.
Economic Efficiency: Biomass fuel is relatively cost-effective, can

Biomass boilers can achieve energy conservation and emission reduction through the following methods:
Combustion Technology: The combustion technology used in biomass boilers, such as fluidized bed combustion and particle combustion, enhances combustion efficiency, allowing for more effective fuel utilization and reducing energy waste.
Energy Recovery: A biomass boiler produces a large amount of thermal energy in the combustion process, which can be recovered and utilized through a flue gas waste heat recovery system. For example, using a flue gas waste heat boiler or a flue gas heat exchanger, the thermal energy in the flue gas is converted into hot water, steam, or other forms of thermal energy, improving energy utilization efficiency.
Control combustion parameters: Biomass boilers can achieve optimal combustion performance by controlling parameters such as combustion temperature and oxygen supply. Reasonable combustion parameters can enhance combustion efficiency, reduce fuel consumption, and minimize emissions.
Fuel Quality Control: Selecting biomass fuel quantities with high moisture content and low ash content can enhance combustion efficiency, reduce ash and pollutant emissions.
Regular maintenance and cleaning: Perform regular maintenance and cleaning on biomass boilers to remove ash and soot from the combustion chamber and flue, ensuring the boiler operates and burns normally.
Our Control System: Utilizes an automatic control system, capable of real-time monitoring and adjustment of the biomass boiler's operating status, ensuring stable combustion.
Through these measures, biomass boilers can achieve energy conservation and emission reduction, enhance energy utilization efficiency, decrease carbon emissions and the generation of pollutants, and be more environmentally friendly.
Our company attaches great importance to technological innovation and research and development. We have one municipal-level enterprise technology center in Heze City, equipped with non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and other testing facilities. We have over 600 types of equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. Our key products such as temperature and pressure vessel welding, biomass boiler emission reduction, and waste heat recovery have successively entered multiple Shandong Provincial Department of Industry and Information Technology scientific and technological innovation projects, Shandong key projects, and Heze City innovative and excellent projects. We have accumulated 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The technical team, in collaboration with Professor Yajiang Li of Shandong University, has developed deep cryogenic container processing technology using the international plasma arc + wire feeding argon arc welding (PAW-GTAW) technique, which has reached an international level in the field of deep cryogenic container manufacturing, as certified by the provincial-level scientific and technological achievement evaluation. Choose Zhongjie Special Equipment, and let's create brilliance together!