Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, B-grade boiler installation and GB2, GC2 grade pressure pipeline installation licenses, as well as equipment and machinery installation contracting qualifications. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and a council member of the Shandong Equipment Manufacturing Association. The company has also passed the ISO9001 Quality Management System certification, ISO14001 Environmental Management System certification, OHSAS18001 Occupational Health and Safety Management System certification, and the U.S. ASME/U2 certification.
If a gas boiler gas leak is detected, the following measures must be taken immediately to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilate the area: Open windows and doors to ensure proper indoor air circulation and expel any remaining gas. This lowers the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of a gas leak, avoid using open flames and electrical equipment to prevent fires or sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent sparks that could lead to accidents. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leak and request their inspection and handling. 6. Do not use a phone or make calls: In case of suspected gas leaks, do not use a phone or make calls to avoid static electricity causing an explosion. 7. Keep away from the leak area: Stay as far away from the leak area as possible to ensure your safety. Do not approach the gas boiler or the leak point to avoid injury. Remember, handling a gas boiler gas leak is a dangerous task that requires caution. It is best handled by professionals to ensure safety.

A thermal oil heater using gas as fuel transfers heat energy through thermal oil. Its features include: High thermal efficiency: The thermal oil heater uses thermal oil as the heat transfer medium, offering a high heat transfer efficiency. Thermal oil boasts a high thermal conductivity and stability, enabling rapid heat transfer and improving energy utilization. Temperature control: By regulating the gas supply and the circulation of thermal oil, the heater can control the working temperature, catering to various processes and production needs, enhancing production efficiency and product quality. Safety and reliability: The thermal oil heater employs a closed-loop system, with combustion occurring in a sealed environment, reducing the risk of gas leaks. Moreover, thermal oil has a high flash point and ignition point, making the combustion process relatively safe and reliable. Flexibility: The heater is suitable for various industrial fields such as chemicals, textiles, and food processing. It can adapt to different process requirements and working conditions, offering strong flexibility. Environmental protection and energy-saving: The thermal oil heater emits relatively low amounts of exhaust gas during combustion, causing minimal environmental pollution. With high thermal efficiency and precise temperature control, it can save energy consumption and reduce energy costs. It is important to note that regular inspection and maintenance are required during the operation of the thermal oil heater to ensure its proper functioning and extended lifespan. Additionally, selecting the appropriate model and supplier of the thermal oil heater is crucial to ensure its characteristics and performance.

Common malfunctions and troubleshooting methods for gas boiler burners are as follows: - No flame or unstable flame: Check if the gas supply is normal and ensure the gas valve is open. Clean the burner nozzle to ensure the passage is clear. Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the gas-to-air ratio to ensure the proper mixture. - Incomplete combustion or black smoke: Check if the gas supply is sufficient and adjust the gas pressure. Clean the burner nozzle and combustion chamber to ensure the passage is clear. Adjust the gas-to-air ratio to ensure the proper mixture. Check for carbon buildup or dirt in the burner and clean or replace damaged parts. - Difficulties in点火 or点火 failure: Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the position and gap of the ignition electrode to ensure normal spark generation. Check if the ignition transformer or controller is functioning properly, repair or replace damaged parts. - Abnormal noise from the burner: Check if the gas supply is normal and ensure the gas valve is open. Inspect the burner and combustion chamber for loose parts, tighten or replace damaged parts. Clean the burner and combustion chamber to ensure there is no carbon buildup or dirt. - If the above methods do not solve the problem, it is recommended to contact a gas boiler maintenance technician for inspection and maintenance. Additionally, to ensure safety, follow the relevant safety operation procedures when using a gas boiler.

The inspection contents and requirements for gas-fired boilers typically include the following aspects: - Safety valve and pressure gauge: Check the installation and fixation of the safety valve and pressure gauge to ensure proper operation and accurate pressure display. - Combustion system: Inspect the operational status of the burner, including ignition, combustion, and combustion stability. Check the connections of the gas supply pipeline and valves to ensure no leaks. - Flue and heat exchanger: Inspect the cleanliness of the flue and heat exchanger, including accumulated dust and dirt, to ensure heat exchange efficiency and smoke emissions meet requirements. - Water level control system: Check the operational status of the water level controller and gauge to ensure accurate and reliable water level control, preventing excessive or insufficient water levels. - Gas supply system: Inspect the installation and connections of the gas supply pipeline and valves to ensure normal gas supply and no leaks. - Electrical system: Check the wiring and connections of the electrical system, including power supply, controllers, and sensors, to ensure normal operation of electrical equipment and avoid electrical faults. - Safety devices: Inspect the operational status of safety devices, including safety valves, pressure switches, and temperature controllers, to ensure proper functioning and ensure safe boiler operation. - Records and documents: Review the boiler's operating records, maintenance records, and inspection reports, ensuring complete and accurate documentation of operation and maintenance. The inspection of gas-fired boilers should be conducted by institutions or personnel with the appropriate qualifications, following relevant laws, regulations, and standards. The frequency and specific requirements for inspections can be determined based on the boiler's usage and local regulations. Timely inspections and maintenance ensure safe and efficient operation of gas-fired boilers.
Zhong Jie Special Equipment upholds the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of green energy equipment. We commit to society with high-quality, cost-effective products and services!