Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as a mechanical and electrical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the Council Member of the Shandong Equipment Manufacturing Association. The company has also passed certifications for the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System, and the American ASME/U2 certification.
If gas boiler gas leakage is detected, the following measures must be taken immediately to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilation: Open windows and doors to ensure indoor air circulation and expel any remaining gas. This reduces the indoor gas concentration, minimizing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of gas leakage, avoid using open flames and electrical equipment to prevent fires or sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent sparks that could lead to accidents. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leakage and request them to inspect and handle the situation. 6. Do not use a phone or make calls: Do not use a phone or make calls in case of suspected gas leakage to prevent static electricity from causing an explosion. 7. Keep away from the leakage area: Try to stay away from the leakage area to ensure your safety. Do not approach the gas boiler or the leakage point to avoid injury. Remember, handling gas boiler gas leakage is a dangerous task that requires caution. It's best left to professionals to ensure safety.

A gas thermal oil furnace is a device that uses gas as fuel and transfers heat energy through thermal oil. Its features include:  - High thermal efficiency: The gas thermal oil furnace employs thermal oil as the heat transfer medium, offering high heat transfer efficiency. The thermal oil has high thermal conductivity and stability, enabling rapid heat transfer and enhancing energy utilization efficiency. - Temperature control: The gas thermal oil furnace can control the working temperature by regulating gas supply and thermal oil circulation. This temperature control meets various process and production requirements, improving production efficiency and product quality. - Safety and reliability: The gas thermal oil furnace uses a closed-loop system, with the combustion process occurring in an enclosed environment, reducing the risk of gas leakage. Additionally, the thermal oil has a high flash point and ignition point, making the combustion process relatively safe and reliable. - Flexibility: The gas thermal oil furnace is suitable for various industrial fields, such as chemicals, textiles, and food processing. It can adapt to different process demands and working conditions, offering strong flexibility. - Environmental protection and energy saving: The gas thermal oil furnace emits relatively low amounts of exhaust during combustion, causing minimal environmental pollution. Due to its high thermal efficiency and temperature control, it can save energy consumption and reduce energy costs. - It is important to note that regular inspection and maintenance are required for the gas thermal oil furnace during operation to ensure proper functioning and extend its service life. Moreover, selecting the appropriate model and supplier of the gas thermal oil furnace is crucial for ensuring its features and performance.

Common faults and solutions for gas boiler burners are as follows: - No flame or unstable flame: Check if the gas supply is normal and ensure the gas valve is open. Clean the burner nozzle to ensure the passage is clear. Check if the ignition electrode is clean, free of carbon deposits or dirt. Adjust the gas and air ratio to ensure the correct mixture. - Incomplete combustion or black smoke: Check if the gas supply is sufficient and adjust the gas pressure. Clean the burner nozzle and combustion chamber to ensure the passage is clear. Adjust the gas and air ratio to ensure the correct mixture. Check for carbon deposits or dirt in the burner, clean or replace damaged parts. - Difficulty in点火 or点火 failure: Check if the ignition electrode is clean, free of carbon deposits or dirt. Adjust the position and gap of the ignition electrode to ensure normal spark generation. Check if the ignition transformer or controller is functioning properly, repair or replace damaged parts. - Abnormal noise from the burner: Check if the gas supply is normal and ensure the gas valve is open. Check for loose parts in the burner and combustion chamber, tighten or replace damaged parts. Clean the burner and combustion chamber to ensure there are no carbon deposits or dirt. - If the above methods do not solve the problem, it is recommended to contact a gas boiler maintenance technician for inspection and maintenance. Also, to ensure safety, follow the relevant safety operating procedures when using a gas boiler.

The inspection contents and requirements for gas boilers typically include the following aspects: - Safety Valve and Pressure Gauge: Check the installation and fixation of the safety valve and pressure gauge to ensure proper operation and accurate pressure display. - Combustion System: Inspect the operating status of the burner, including ignition, combustion, and combustion stability. Check the connections of the gas supply pipeline and valves to ensure no leaks. - Flue and Heat Exchanger: Examine the cleanliness of the flue and heat exchanger, checking for accumulated ash and dirt to ensure heat exchange efficiency and smoke emissions meet requirements. - Water Level Control System: Check the operation of the water level controller and gauge to ensure accurate and reliable water level control, preventing overfill or low water levels. - Gas Supply System: Inspect the installation and connection of the gas supply pipeline and valves to ensure normal gas supply and no leaks. - Electrical System: Check the wiring and connections of the electrical system, including power supply, controllers, and sensors, to ensure normal operation of electrical equipment and avoid electrical faults. - Safety Devices: Inspect the operation of safety devices, including safety valves, pressure switches, and temperature controllers, to ensure proper functioning and guarantee safe boiler operation. - Records and Documents: Review the boiler's operating, maintenance, and inspection records to ensure complete and accurate documentation. The inspection of gas boilers should be conducted by qualified institutions or personnel, adhering to relevant laws, regulations, and standards. The frequency and specific requirements for inspections can be determined based on the boiler's usage and local regulations. Timely inspections and maintenance ensure safe and efficient operation of gas boilers.
ZJ Special Equipment adheres to the great vision of "realizing employees' dreams, creating customer value, and striving for the prosperity and strength of our motherland," focusing on the development of green energy equipment industry, and devoting high-value products and services to society!