Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as a mechanical and electrical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the director unit of the Shandong Equipment Manufacturing Association. The company has also passed the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System certifications, and the American ASME/U2 certification.
Low-temperature carbon dioxide storage tanks offer several advantages: - Low-temperature storage capacity: These tanks can store carbon dioxide at low temperatures, typically between -40°C and -70°C. This low-temperature storage allows carbon dioxide to be stored in a liquid state, significantly reducing the required storage space. - High storage density: Due to carbon dioxide being stored in a liquid state at low temperatures, its storage density is relatively high. Compared to gaseous storage, liquid storage can hold more carbon dioxide in a smaller tank, improving storage efficiency. - Environmental and renewable: Carbon dioxide is an environmentally friendly gas, with minimal harmful emissions during storage and use. Moreover, carbon dioxide can be reused through capture and recycling technologies, reducing environmental impact. - High safety: Low-temperature carbon dioxide storage tanks are made from high-strength materials with good sealing and corrosion resistance. They are equipped with safety valves and pressure relief devices to effectively control internal pressure and temperature, ensuring safe storage. - Wide application: These tanks are widely used in various industries such as food and beverage, pharmaceutical, and chemical industries. They can be used for freezing food, refrigeration equipment, gas supply, and more, meeting diverse needs. In summary, low-temperature carbon dioxide storage tanks offer low-temperature storage capacity, high storage density, environmental friendliness, renewable properties, high safety, and wide application. These advantages make them an essential storage and usage equipment for carbon dioxide in many industries.

When using CO2 storage tanks, the following points should be noted: - Safe Operation: When using CO2 storage tanks, it is mandatory to follow relevant safety operation procedures and standards. Operators should receive training to understand the tank's characteristics, operational requirements, and safety measures, and operate strictly in accordance with the procedures. - Tank Inspection: Regularly inspect the tank's appearance, sealing, valves, and pipeline connections to ensure the tank's integrity and safety. Any abnormalities or damage should be addressed promptly with repairs or replacements. - Tank Pressure Control: The tank's pressure must be maintained within a safe range. Regularly check and calibrate pressure sensors, safety valves, etc., to ensure the proper functioning of the pressure control system. - Temperature Control: CO2 storage tanks typically require low-temperature storage. Ensure the proper operation of cooling equipment, and regularly check and calibrate temperature sensors to maintain appropriate storage temperatures. - Leak Protection: CO2 is a gas prone to leakage, which can lead to safety risks and environmental pollution. Ensure the tank and pipeline sealing, regularly inspect and replace seals, and address any leaks promptly. - Fire and Explosion Prevention: Avoid open flame operations near the tank to prevent fire sources from contacting CO2. Maintain good ventilation around the tank to prevent CO2 accumulation. - Waste Disposal: Dispose of abandoned CO2 storage tanks or residues in accordance with relevant regulations. Adhere to environmental protection requirements to ensure safe disposal and environmental protection. - Regular Maintenance: Conduct regular maintenance and inspections of the tank, including cleaning and painting.

二氧化碳储罐的检验频率应根据当地的法规、标准和制造商的建议来确定。一般来说，以下几个因素会影响二氧化碳储罐的检验频率： 法规和标准要求：不同和地区可能有不同的法规和标准，规定了储罐的检验要求和频率。例如，美国的DOT标准要求液化气体储罐每5年进行一次外部检验和每10年进行一次内部检验。 制造商建议：储罐的制造商通常会提供关于检验频率的建议。这些建议基于储罐的设计、材料和使用寿命等因素，可以作为制定检验计划的参考。 使用环境和条件：储罐的使用环境和条件也会影响检验频率。例如，如果储罐暴露在腐蚀性环境中或经常受到机械应力，可能需要更频繁的检验。 一般来说，液化气体储罐的外部检验通常是通过目视检查、超声波检测、磁粉检测等方法进行的，以评估储罐的外部状况和可能存在的缺陷。内部检验可能需要排空储罐，并通过内部检查、厚度测量、焊缝检测等方法来评估储罐的内部状况。 重要的是，储罐的检验应由经过培训和有经验的人员进行，并严格按照相关的法规、标准和制造商的建议进行。定期的检验和维护可以确保储罐的安全性和可靠性，减少事故的风险。

The cooling process for carbon dioxide storage tanks can vary depending on specific application requirements and design. Here is an example of a general cooling process for a carbon dioxide storage tank: Initial cooling: When carbon dioxide enters the tank, it is typically cooled initially to lower its temperature. This can be achieved by cooling the carbon dioxide through a condenser or cooler. The cooling medium can be cold water or refrigerant. Tank cooling: After carbon dioxide enters the tank, it is necessary to continue cooling the tank itself to maintain the liquid state of the carbon dioxide. This can be done by installing coolers or cooling pipes externally to the tank and circulating the cooling medium (such as cold water or refrigerant). Temperature control: During the tank cooling process, the temperature inside the tank must be controlled to ensure that the carbon dioxide remains within an appropriate temperature range. This can be achieved through temperature sensors and control systems that automatically control the temperature based on the set range. Insulation: To reduce heat transfer and energy loss, the tank is usually insulated. This can be done by setting up insulating materials (such as polyester foam or glass wool) externally to the tank to minimize heat conduction. Regular inspection and maintenance: In the tank cooling process, regular inspection and maintenance of cooling equipment and insulation materials are required to ensure proper operation and effectiveness. This includes cleaning coolers and checking the integrity and effectiveness of the insulation materials. It should be noted that the specific cooling process for carbon dioxide storage tanks may vary due to different application scenarios and process requirements. In practice, process design and operation should be based on specific conditions to ensure the safety and performance of the tank. Consult with engineers or storage professionals.
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.