Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineering and technical staff and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When selecting a thermal oil furnace for the rubber industry, pay attention to the following aspects: - Temperature Requirements: Determine the required working temperature range based on the process needs of the rubber industry. Ensure the thermal oil furnace can stably provide the required working temperature. - Heat Load: Calculate the required heat load based on the production scale and process requirements of the rubber industry. Ensure the heat load of the thermal oil furnace meets the industry's needs. - Thermal Efficiency: The thermal efficiency of the thermal oil furnace directly affects energy consumption and operating costs. Consider the thermal efficiency and choose energy-saving products. - Safety: The safety of the thermal oil furnace is crucial. Choose a furnace with comprehensive safety protection devices and an automatic control system to ensure safe and reliable operation. - Maintenance: Proper maintenance is vital for extending the lifespan and ensuring smooth operation. Consider the ease and cost of maintenance when selecting a thermal oil furnace. - Manufacturer's Reputation: Choose a thermal oil furnace manufacturer with a good reputation and extensive experience to ensure product quality and reliable after-sales service. - Cost-Effectiveness: Consider the price, energy consumption, and maintenance costs of the thermal oil furnace, choosing products with good cost-effectiveness. - Consultation: When purchasing a thermal oil furnace, it is recommended to consult with heating equipment suppliers or engineers, select based on specific needs, and adhere to relevant industry standards and regulations.

In textile processing factories, common types of boilers include the following: Steam Boilers: Steam boilers are one of the most commonly used types of boilers in textile processing plants. They can produce high-temperature, high-pressure steam used for thermal treatments, dyeing, boiling, and other processes in textile processing. Steam boilers offer advantages such as rapid heating, stability, and high efficiency. Hot Water Boilers: Hot water boilers are suitable for low-temperature textile processing techniques like washing and drying. They provide a stable supply of hot water with high temperature control accuracy and low energy consumption. Hot Air Furnaces: Hot air furnaces are used for drying processes in textile processing. They transfer heat energy to textiles through the hot air produced by combustion, achieving quick drying. Hot air furnaces have the advantages of fast heating and high thermal efficiency. When choosing the appropriate boiler type for a textile processing plant, consider the following factors: Processing Requirements: Determine the required heat medium (steam, hot water, hot air) and parameters such as working temperature and pressure based on the specific processing requirements of the textile factory. Energy Costs and Efficiency: Consider the energy consumption and efficiency of different boiler types and select those that meet processing needs with high energy utilization efficiency. Environmental Requirements: Pay attention to the emission standards and environmental performance of the boilers, choosing a type that meets environmental requirements. Maintenance and Operation: Consider the ease of maintenance and operation of the boiler, ensuring it is reliable and cost-effective.

Switching from a standard boiler to a gas boiler can significantly enhance energy efficiency and energy-saving effects. Here are some insights into the energy-saving efficiency of switching to a gas boiler: High combustion efficiency: Gas boilers use gas as fuel and typically have higher combustion efficiency. Compared to traditional coal-fired or oil-fired boilers, gas boilers can achieve a higher level of combustion efficiency, reducing energy waste. Low emissions: The exhaust emissions produced during the combustion process of gas boilers are relatively low, causing less environmental pollution. The combustion technology and emission control devices commonly used in gas boilers can effectively reduce the emissions of harmful substances such as nitrogen oxides. Fast start and stop: Gas boilers can start and stop quickly, allowing for flexible adjustments according to actual needs. Compared to coal-fired boilers, gas boilers have shorter start and stop times, avoiding prolonged preheating and cooling processes, and reducing energy waste. High thermal efficiency: Gas boilers generally have higher thermal efficiency, achieving a higher level of heat energy conversion efficiency. The heat exchange technology and energy-saving design used in gas boilers maximize the utilization of the heat energy of gas, improving heating effects. Intelligent control and management: Gas boilers are usually equipped with intelligent control systems that can automatically adjust operating conditions according to actual needs. Through control and regulation, gas boilers can achieve stable heating and avoid unnecessary energy waste. It is important to note that when switching to a gas boiler, the reliability and safety of the gas supply, as well as the suitability and installation requirements of the gas boiler, should be considered. It is recommended to consult engineers or relevant agencies before proceeding with the conversion.

A condensing gas steam boiler is an energy-saving boiler equipment, with the following working principles and features: Working Principle: Steam Generation: The condensing gas steam boiler produces high-temperature flue gas by burning gas, which then exchanges heat with the water pipes inside the boiler, heating the water into steam. Steam Condensation: After steam is generated, it enters the condenser, where it exchanges heat with the condensing medium (usually cold water or recycled water) inside, releasing heat from the steam and condensing it back into water. Flue Gas Reuse: The flue gas after condensation still contains some heat, which can be recovered and utilized through a flue gas reuse system to improve the boiler's thermal efficiency. Features: Energy Saving: By utilizing the principle of steam condensation, the condensing gas steam boiler maximizes the use of steam's heat, enhancing the thermal energy utilization efficiency and reducing energy consumption. Low Emissions: Due to the heat recovery during flue gas condensation, the flue gas temperature is lower, resulting in relatively low emissions of pollutants and a smaller environmental impact. Compact Structure: The condensing gas steam boiler typically features a compact structural design, occupying less space, making it suitable for locations with limited space. Rapid Startup: The condensing gas steam boiler has the characteristic of rapid startup and shutdown, allowing for flexible adjustments and operations according to actual needs. Wide Application Range: The condensing gas steam boiler is suitable for heating and steam requirements in industrial production processes, such as power plants, chemical factories, and textile factories. Note: It is important to maintain and service the condensing gas steam boiler during use, regularly cleaning the condenser and flue gas reuse system to ensure proper operation and performance.
Our company attaches great importance to technological innovation and R&D design. We have one municipal-level enterprise technology center in Heze City, equipped with testing facilities for non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, etc. We have over 600 various instruments and equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. Our key products and technologies, such as temperature and pressure vessel welding, biomass boiler emission reduction, and waste heat utilization, have successively been shortlisted for multiple Shandong Provincial Department of Industry and Information Technology Science and Technology Innovation projects, Shandong Provincial Key Projects, and Heze City Innovation and Excellence projects. We have accumulated 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The technical team, in collaboration with Professor Yajiang Li from Shandong University, has developed deep cryogenic container processing technology using the international plasma arc + filler wire tungsten inert gas arc welding (PAW-GTAW) technique. After provincial-level scientific and technological achievement appraisal, the technology level has reached international standards in the field of deep cryogenic container manufacturing.
Choose Jeteq's packaging, let's create brilliance together!