Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as a qualification for the installation of electromechanical equipment. It is a member of the China Boilers and Water Treatment Association, the China Chemical Equipment Association, and the council unit of the Shandong Equipment Manufacturing Association. The company has also passed certifications for the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System, and the American ASME/U2 certification.
Chemical cleaning of industrial boilers is a common method that effectively removes dirt and deposits inside the boiler, enhancing heat exchange efficiency and extending the boiler's lifespan. Below are the general steps and methods for industrial boiler chemical cleaning: Preparation: Turn off the boiler's power and gas supply, drain the water and steam inside the boiler, and ensure the boiler is in a safe condition. Prepare the required chemical cleaning agents and cleaning equipment. Cleaning Agent Selection: Choose a suitable chemical cleaning agent based on the boiler's material and the nature of the dirt. Common cleaning agents include acidic, alkaline, and chelating agents. Cleaning Agent Circulation: Dissolve the cleaning agent in an appropriate amount of water and circulate it into the boiler through a pump. Determine the circulation time and temperature of the cleaning agent based on the size of the boiler and the extent of the dirt. Cleaning Agent Action: During the circulation, the cleaning agent reacts chemically with the dirt inside the boiler, dissolving and decomposing it. Acidic cleaning agents can remove rust and scale, while alkaline cleaning agents can remove grease and organic matter. Rinsing and Neutralization: After the cleaning agent circulation is complete, rinse the boiler with clean water to flush out the cleaning agent and dissolved dirt. At the same time, use a neutralizer to neutralize any remaining acidic or alkaline substances, ensuring the boiler's neutrality. Inspection and Maintenance: After cleaning, inspect the boiler to ensure the cleaning effect and normal operation. Perform the necessary maintenance and repair work as needed. Points to Note During Industrial Boiler Chemical Cleaning: 1. Strictly follow the instructions for using chemical cleaning agents and safety operation procedures to ensure the safety of the operators. 2. Choose the appropriate cleaning agent and method based on the boiler's material and the properties of the cleaning agent. 3. Control the concentration, temperature, and circulation time of the cleaning agent to avoid unnecessary damage to the boiler. 4. Monitor the concentration and pH value of the cleaning agent in a timely manner during the cleaning process and adjust the cleaning conditions. 5. Flush the boiler after cleaning to ensure that all cleaning agents and dirt are completely removed. 6. Perform boiler maintenance and repair promptly after cleaning to ensure normal operation and long-term use.

When addressing issues with gas boilers during the heating process, consider the following aspects: Check gas supply: Ensure the gas supply is normal, and inspect for any blockages or leaks in the gas pipes. If issues are found, promptly repair or replace the gas pipes. Clean the burner and combustion chamber: Regularly clean the burner and combustion chamber to remove accumulated soot and dirt. This enhances combustion efficiency and reduces gas wastage. Inspect and adjust the ratio of gas to air: Ensure the ratio of gas to air is appropriate for optimal combustion. An incorrect ratio may result in incomplete combustion or excessive exhaust. Inspect and clean the heat exchanger: Regularly inspect and clean the heat exchanger to remove soot and dirt. This improves heat exchange efficiency, ensuring heat is effectively transferred to the heating system. Inspect and maintain the circulating pump and valves: Ensure the circulating pump and valves operate correctly to allow smooth flow of hot water or steam to the heating system. Inspect and maintain the control system: Ensure the gas boiler's control system operates correctly, allowing precise control of parameters such as temperature, pressure, and flow. If problems are detected, promptly repair or replace the controller. Regular maintenance: Conduct regular maintenance on the gas boiler, including cleaning, lubrication, and securing bolts. This extends the boiler's lifespan and reduces the occurrence of malfunctions. Training and awareness: Provide staff training to enhance awareness of operating and maintaining gas boilers. Improved knowledge and skills among employees help in effective management and problem-solving related to boiler heating processes. If issues cannot be resolved or safety

Industrial boilers, during their long-term operation, can accumulate scale and sediments, affecting heat exchange efficiency and the normal operation of the boiler. Here are some effective descaling methods: 1. Mechanical Cleaning: Utilizes cleaning equipment and tools to wash away scale and sediments inside the boiler with high-pressure water or mechanical brushes. This method is suitable for lighter scale and sediments. 2. Chemical Cleaning: Uses chemical cleaning agents to dissolve scale and sediments through chemical reactions. Select an appropriate cleaning agent based on the composition and properties of the scale, and operate according to the instructions provided. Chemical cleaning requires safe operation to avoid damage to equipment and the environment. 3. Acid Cleaning: A common descaling method for hard-to-dissolve scale and sediments. Common acid cleaning agents include, etc., and the appropriate cleaning agent and concentration should be selected based on the specific situation. Acid cleaning requires safe operation to avoid harm to equipment and personnel. 4. Alkaline Cleaning: A descaling method for certain types of scale, suitable for alkaline scale. Common alkaline cleaning agents include, etc., and the appropriate cleaning agent and concentration should be selected based on the specific situation. Alkaline cleaning requires safe operation to avoid harm to equipment and personnel. 5. Physical Descaling: Physical descaling methods include ultrasonic cleaning and electro-dissolution, etc. Ultrasonic cleaning uses the vibration effect of ultrasound to shake the scale into pieces. Electro-dissolution uses the principle of electrolysis to dissolve scale through the action of electricity. These physical descaling methods are suitable for special situations and specific types of scale. When selecting a descaling method, it is necessary to consider the specific conditions of the boiler.

In the burner of a thermal oil furnace, adjusting the air door in low flame conditions is crucial. Here are some common knowledge and precautions: The role of the air door: The air door is a key component in the burner that controls the supply of combustion air. By adjusting the opening of the air door, the flow of combustion air can be controlled, thereby affecting the oxygen supply and combustion effect during the combustion process. Adjustment in low flame conditions: In low flame conditions, the burner needs to maintain a stable combustion to ensure combustion efficiency and heat output. In this case, the opening of the air door needs to be adjusted appropriately to maintain an adequate supply of combustion air. Generally, the opening of the air door is relatively small during low flame to maintain an appropriate oxygen supply, avoiding incomplete combustion or instability. Ratio of combustion air to fuel: In low flame conditions, it is necessary to ensure that the ratio of combustion air to fuel is appropriate. Too much combustion air leads to incomplete combustion and energy waste, while too little combustion air results in unstable combustion and the production of harmful gases. By adjusting the opening of the air door, the ratio of combustion air to fuel can be controlled to achieve a stable combustion effect. Burner tuning and optimization: During the installation and tuning of the burner of a thermal oil furnace, appropriate tuning and optimization are required. Through actual operation and monitoring, adjust the opening of the air door and other parameters to achieve the best combustion effect and energy efficiency performance. This requires...
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.