Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineering and technical staff and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The internal structure of an automatic biomass boiler typically includes the following main components:
Combustion Chamber: The combustion chamber is the area within a biomass boiler where combustion takes place. It typically consists of the burner, combustion chamber walls, top, and bottom. The combustion chamber provides the space and oxygen required for combustion, allowing biomass fuel to burn and generate heat energy.
Chimney System: The chimney system is designed to channel flue gases produced by combustion out of the combustion chamber. It includes flue pipes, chimneys, and flue gas purification equipment, etc. The design and layout of the chimney system can effectively enhance the efficiency of flue gas emissions and heat energy utilization.
Heat Exchangers: Heat exchangers are a critical component in biomass boilers, used to transfer thermal energy from the flue gas produced by combustion to water or other working substances. Common types of heat exchangers include water tube heat exchangers and flue tube heat exchangers. The design and material selection of heat exchangers are crucial for improving

Biomass fuel boilers feature the following product characteristics:
Fuel Diversity: Biomass fuel boilers can accommodate a variety of biomass fuels, such as wood chips, straw, rice husks, etc. This diversity makes biomass fuel boilers more flexible and sustainable in energy utilization.
Eco-friendly Low Emission: Biomass fuel boilers burn biomass fuel, resulting in relatively low emissions during combustion, such as particulates and nitrogen oxides. Consequently, biomass fuel boilers have lower carbon emissions and environmental pollution.
Energy-saving: Biomass fuel boilers utilize advanced combustion technology and heat recovery techniques to achieve high combustion and thermal efficiency. This maximizes the energy utilization of biomass fuel.
Automated Control: The biomass fuel boiler is equipped with an automated control system that accurately controls and adjusts parameters such as temperature, pressure, and fuel supply. The control system features safety protection functions to ensure the safe operation of the boiler.
High Reliability and Stability: The materials and processes used in biomass fuel boilers offer excellent durability and stability. Rigorous quality control and testing ensure the boiler's high reliability and long-term stable operation.
Flexible Application: Biomass fuel boilers are widely applicable in industrial, commercial, and residential sectors, such as for heating, heating systems, and steam generators. They offer flexible installation options and capacity choices to meet diverse user needs.

High evaporation rates in biomass pellet boiler fuel may lead to the following issues:
Incomplete combustion: Fuels with high vapor content release a significant amount of steam during combustion, which reduces the combustion temperature and affects the completeness of the burn. Incomplete combustion leads to heat loss and increased emissions, diminishing the boiler's thermal efficiency and environmental performance.
Poor combustion stability: Fuel with high evaporation rates can easily cause instability in the combustion process, leading to issues such as flameout and uneven combustion. This may result in unstable operation of the boiler and affect the stability of hot water supply.
To address issues caused by high-evaporation fuel, the following measures can be taken:
Combustion System Optimization: Optimize the combustion system of biomass pellet boilers, covering aspects such as combustion chamber design, combustion air supply, and mixing. Enhance combustion completeness and stability through measures like increasing combustion temperature and oxygen supply.
Combustion Control: Utilizes a combustion control system that monitors and adjusts parameters such as temperature and oxygen content in real-time during the combustion process. Adjusts the supply of combustion air based on actual conditions to maintain stability and completeness of combustion.
Fuel Pretreatment: Pre-treat biomass pellet fuel with high volatilization content, such as drying and crushing. By reducing the moisture content and particle size of the fuel, the volatilization content is decreased, enhancing the combustion efficiency and stability.
Burn parameter adjustment: Adjust the boiler's burn parameters, such as burn temperature and duration, based on actual conditions. Through reasonable parameter adjustments, make the combustion process better suited to the characteristics of high-evaporation fuel.
In summary, by optimizing the combustion system, adjusting controls, fuel pretreatment, and fine-tuning combustion parameters, issues related to high fuel evaporation in biomass pellet boiler fuel can be reduced, thereby improving the boiler's

Biomass boilers offer the following advantages:
Renewable Energy: Biomass boilers utilize biomass fuels such as wood chips and straw, which are renewable and can be obtained through planting and regeneration cycles. These fuels have lower carbon emissions compared to fossil fuels.
Environmental and Low-Carbon: The carbon dioxide produced during biomass combustion can be absorbed by plants, forming a cycle that reduces the burden on the atmosphere. Additionally, emissions and pollutants from biomass combustion are relatively low, resulting in minimal environmental impact.
Resource-rich: Biomass fuel sources are diverse, encompassing crop straw, forest waste, industrial by-products, etc., with relatively abundant resources that are not prone to depletion.
High thermal efficiency: The biomass boiler utilizes advanced combustion technology and a heat recovery system, enabling high conversion and utilization of thermal energy, thus enhancing energy efficiency.
Versatility: Biomass boilers are not only used for heating but also for hot water supply and industrial heating in various applications.
However, biomass boilers also have some drawbacks:
Fuel supply is unstable: The supply of biomass fuel is affected by factors such as season, region, and crop yields, which may lead to instability in the supply.
Particulate matter produced by combustion: A certain amount of particulate matter is generated during biomass combustion, which has an impact on air quality and requires treatment through flue gas purification equipment.
Fuel handling and storage costs: Biomass fuel requires pretreatment, drying, and storage, which may increase costs and complexity.
High technical requirements: Biomass pot
Zhongjie Special Equipment adheres to the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We offer society high-quality and cost-effective products and services!