Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total of 200,000 square meters, with the main workshop spanning 83,000 square meters. There are currently 710 employees, including 247 engineers and technicians and 82 intermediate-level technical personnel. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province," and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The internal structure of an automatic biomass boiler typically includes the following main components:
Combustion Chamber: The combustion chamber is the area within a biomass boiler where combustion takes place. It typically consists of a burner, combustion chamber walls, top, and bottom. The combustion chamber provides the space and oxygen needed for the biomass fuel to burn, producing thermal energy.
Chimney System: The chimney system is designed to channel flue gases produced by combustion out of the combustion chamber. It consists of flue pipes, chimneys, and flue gas purification equipment, etc. The design and layout of the chimney system can effectively enhance the efficiency of flue gas emissions and thermal energy utilization.
Heat Exchangers: Heat exchangers are a crucial component in biomass boilers, used to transfer thermal energy from the flue gas produced by combustion to water or other working fluids. Common types of heat exchangers include water tube heat exchangers and flue tube heat exchangers. The design and material selection of heat exchangers are crucial for improving

Biomass fuel boilers feature the following product characteristics:
Fuel Diversity: Biomass fuel boilers can accommodate various biomass fuels, such as wood chips, straw, rice husks, etc. This diversity allows for greater flexibility and sustainability in energy utilization for biomass fuel boilers.
Eco-friendly Low Emission: Biomass fuel boilers burn biomass fuel, resulting in relatively low emissions during combustion, such as particulates and nitrogen oxides. Consequently, biomass fuel boilers have lower carbon emissions and environmental pollution.
Energy-saving: The biomass fuel boiler utilizes advanced combustion technology and heat recovery techniques to achieve optimal combustion and heat utilization. It boasts high combustion efficiency and thermal efficiency, maximizing the energy potential of biomass fuel.
Automated Control: The biomass fuel boiler is equipped with an automated control system that can accurately control and adjust parameters such as temperature, pressure, and fuel supply. The control system features safety protection functions to ensure the safe operation of the boiler.
High reliability and stability: The materials and processes used in biomass fuel boilers offer excellent durability and stability. Rigorous quality control and testing ensure the boiler's high reliability and long-term stable operation.
Flexible Application: Biomass fuel boilers are widely applicable in industrial, commercial, and residential sectors, including for heating, heating supply, and steam generators. They offer flexible installation options and capacity choices, catering to diverse customer needs.

High evaporation rate of biomass pellet boiler fuel may lead to the following issues:
Incomplete combustion: High volatility fuels release a large amount of steam during the combustion process, which lowers the combustion temperature and affects the completeness of combustion. Incomplete combustion leads to energy loss and increased emissions, reducing the boiler's thermal efficiency and environmental performance.
Poor combustion stability: Fuels with high volatility are prone to instability in the combustion process, which may result in flameout and uneven combustion. This can lead to unstable operation of the boiler and affect the stability of hot water supply.
To address the issues caused by high-evaporation fuel, the following measures can be taken:
Combustion System Optimization: Optimizes the combustion system of biomass pellet boilers, including aspects such as combustion chamber design, combustion air supply, and mixing. Enhances combustion completeness and stability through measures like increasing combustion temperature and oxygen supply.
Combustion Control: Utilizes a combustion control system that continuously monitors and adjusts parameters such as temperature and oxygen content during the combustion process. Adjusts the supply of combustion air based on actual conditions to maintain stability and completeness of the combustion.
Fuel Pretreatment: Pre-treat biomass pellet fuel with high volatile matter content, such as drying and crushing. By reducing the moisture content and particle size of the fuel, the content of volatile matter is decreased, enhancing the efficiency and stability of combustion.
Fuel combustion parameter adjustment: Adjust the boiler's combustion parameters, such as combustion temperature and time, based on actual conditions. Through reasonable parameter adjustments, make the combustion process better adapt to the characteristics of high evaporation fuel.
In summary, by optimizing the combustion system, adjusting control mechanisms, pre-treating fuel, and modifying combustion parameters, issues related to high fuel evaporation in biomass pellet boilers can be reduced, thereby enhancing the boiler's

Biomass boilers offer the following advantages:
Renewable Energy: Biomass boilers utilize biomass fuels such as wood chips and straw, which are renewable and can be obtained through planting and regeneration cycles. They have lower carbon emissions compared to fossil fuels.
Environmental Protection and Low Carbon: The carbon dioxide produced during biomass combustion can be absorbed by plants, forming a cycle that reduces the burden on the atmosphere. Additionally, emissions and pollutants during biomass combustion are relatively low, resulting in minimal environmental impact.
Resource-rich: Biomass fuel sources are diverse, including crop straw, forest residues, industrial by-products, etc., with relatively abundant resources and less likely to deplete.
High thermal efficiency: The biomass boiler utilizes advanced combustion technology and a heat recovery system, enabling high conversion and utilization of thermal energy, thereby enhancing energy efficiency.
Versatility: Biomass boilers are not only suitable for heating but also for hot water supply and industrial heating in various applications.
However, biomass boilers also have some drawbacks:
Fuel supply is unstable: The supply of biomass fuel is affected by factors such as seasons, regions, and crop yields, which may lead to instability in supply.
Particulate matter generated by combustion: A certain amount of particulate matter is produced during biomass combustion, which has an impact on air quality and requires treatment through flue gas purification equipment.
Fuel handling and storage costs: Biomass fuel requires pretreatment, drying, and storage, which may increase costs and complexity.
High technical requirements: Biomass pot
ZJ Special Equipment adheres to the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We commit to society with high-value products and services!