Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001 and is located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. The company currently employs 710 people, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Department of Industry and Information Technology. In June 2022, it was named a "Gazelle Enterprise in Shandong Province," and in August 2022, it was recognized as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
If gas boiler gas leakage is detected, immediate action is required to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas flow. This prevents further leakage and reduces safety risks. 2. Ventilate the area: Open windows and doors to ensure proper indoor air circulation and expel any remaining gas. This helps lower the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of gas leakage, avoid using open flames and electrical equipment to prevent fires or sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent sparks that could lead to accidents. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leakage and request their inspection and repair. 6. Do not use a phone or make calls: In cases of suspected gas leakage, do not use a phone or make calls to prevent static electricity from causing an explosion. 7. Keep away from the leakage area: Stay as far away from the leakage area as possible to ensure your safety. Do not approach the gas boiler or the leak point to avoid injury. Remember, handling gas boiler gas leakage is a dangerous task that requires caution. It is best left to trained personnel to ensure safety.

To ensure proper safety procedures for industrial boilers, attention should be given to the following aspects: - Adhere to laws and regulations: Understand and comply with relevant laws, regulations, and standards, including those governing boiler safety management and standards for boiler operation and maintenance. Ensure compliance with legal requirements throughout the process. - Establish a robust management system: Develop a comprehensive industrial boiler safety management system, clearly defining responsibilities and authorities, and standardizing operational procedures and safety measures. Draft operational guidelines and emergency response plans to ensure orderly safety procedures. - Training and education: Provide training and education for personnel involved in industrial boiler safety procedures, enhancing their safety awareness and skill levels. This includes training for boiler operators, maintenance staff, and management personnel. - Regular inspections and maintenance: Conduct regular inspections and maintenance of industrial boilers to ensure proper operation and safety performance. This includes checking and maintaining critical components such as the combustion system, water level control, safety valves, and pressure gauges. - Safety equipment and facilities: Equip necessary safety equipment and facilities, such as safety valves, pressure gauges, water level indicators, and burners. Ensure the proper operation and effectiveness of these facilities. - Regular inspections and assessments: Conduct regular inspections and assessments of industrial boilers to ensure compliance with safety requirements. This includes regular pressure tests, water quality inspections, and combustion efficiency evaluations. - Safety records and documentation management: Establish a comprehensive system for safety records and documentation, recording operational details, maintenance records, and accident reports for industrial boilers. Update and preserve relevant safety information promptly. - Regular drills and emergency response training: Organize regular safety drills and emergency response training to enhance the ability to respond to emergencies and improve efficiency in emergency handling. The above are basic points for ensuring proper safety procedures for industrial boilers. Specific operations should be tailored to actual circumstances and requirements.

When designing a fuel-gas boiler room, the following considerations should be taken into account: Safety Considerations: Ensure that the design of the boiler room complies with relevant safety standards and regulations. Address fire risks by installing appropriate firewalls, fire doors, and isolation facilities. Ensure good ventilation in the boiler room, with suitable ventilation equipment and flue systems to expel harmful gases produced by combustion. Space and Layout: Plan the space and layout of the boiler room according to the number and size of the boilers. Ensure there is sufficient space for operation, maintenance, and cleaning. Arrange the boilers, fuel storage equipment, flue systems, and piping in a manner that facilitates operation and maintenance. Fuel Supply and Storage: Consider the requirements for fuel supply and storage. Ensure the safety and reliability of fuel supply pipelines and equipment, preventing leaks and contamination. Plan the capacity and location of fuel storage equipment to ensure adequate fuel supply and compliance with safety requirements. Emission and Exhaust Gas Treatment: Address the emissions and treatment of exhaust gases produced by combustion. Install suitable flue systems and exhaust gas treatment equipment to minimize the impact of emissions on the environment. Ensure the design and layout of the flue system are reasonable and effective in expelling smoke and exhaust gases. Control and Monitoring Systems: Design appropriate control and monitoring systems to ensure the safety and operation of the boilers. This includes monitoring and control equipment for parameters such as temperature, pressure, and flow, as well as alarm and automatic shutdown devices. Ensure operators can promptly understand the operating status of the boilers and take appropriate actions.

Yes, durable heat transfer oil boilers generally have a longer lifespan. Here are some reasons: Material Quality: Heat transfer oil boilers are made of high-quality materials like high-temperature and corrosion-resistant steel and alloy materials. These materials can withstand high temperatures and pressures, offering excellent durability and corrosion resistance, thus extending the boiler's lifespan. Design and Manufacturing Process: Long-lasting heat transfer oil boilers usually employ specific design and manufacturing techniques. Reasonable structural design and precise manufacturing processes can reduce stress concentration and thermal stress, enhancing the boiler's stability and durability. Regular Maintenance: Regular maintenance is crucial for extending the lifespan of heat transfer oil boilers. Regularly cleaning and inspecting the internal pipes, flues, and burners of the boiler, as well as promptly replacing worn parts, can minimize failures and damages, extending the boiler's lifespan. Proper Operation and Management: Correct operation and management are also vital factors in ensuring the lifespan of heat transfer oil boilers. Operators should follow the operation manual and procedures, avoiding overloading and improper operation to ensure safe and stable operation of the boiler. It's important to note that even durable heat transfer oil boilers require regular inspections and maintenance to ensure proper operation and extend their lifespan. Additionally, the boiler's lifespan is also influenced by factors such as the operating environment, load conditions, and operation methods. Therefore, reasonable usage and maintenance are key to ensuring the longevity of heat transfer oil boilers.
Our company attaches great importance to technological innovation and research and development. We have one municipal enterprise technology center in Heze City, equipped with testing facilities for non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, etc. We have over 600 pieces of various equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. The key products we have developed, such as temperature and pressure vessel welding, biomass boiler emission reduction, and waste heat utilization, have successively been selected for multiple Shandong Provincial Department of Industry and Information Technology science and technology innovation projects, Shandong Provincial key projects, and Heze City innovation and excellence projects. We have accumulated a total of 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. Our technical team, in collaboration with Professor Yajiang Li from Shandong University, has developed deep cryogenic container processing technology using the international plasma arc + wire filling argon arc welding (PAW-GTAW) technology, which has reached an international level in the field of deep cryogenic container manufacturing, as certified by the provincial scientific and technological achievement evaluation.
Choose JETSTAR, join hands to create brilliance together!