Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has seven business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory areas on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineering and technical personnel and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was named a "Specialized and New Enterprise of Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was identified as a "Gazelle Enterprise of Shandong Province" and in August 2022, it was recognized as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
WNS Low-Nitrogen Condensing Hot Water Boilers offer the following advantages: - Low Nitrogen Emissions: Utilizing low-nitrogen combustion technology, these boilers significantly reduce nitrogen oxide (NOx) emissions through optimized combustion processes and burner design. This helps to minimize environmental pollution. - High Thermal Efficiency: With condensing technology, WNS Low-Nitrogen Condensing Hot Water Boilers enhance energy utilization by recovering heat from flue gases. Their thermal efficiency typically exceeds 90%, surpassing traditional hot water boilers. This contributes to energy savings and reduced operational costs. - Safety and Reliability: Equipped with advanced control systems and safety devices, these boilers boast excellent safety performance. They come with multiple safety features such as overheat protection, overpressure protection, and water level protection, capable of automatically monitoring and controlling the boiler's operation to ensure safe operation. - Flexibility: WNS Low-Nitrogen Condensing Hot Water Boilers are suitable for various applications including industrial, commercial, and residential settings. They can accommodate different heat load requirements, offering strong flexibility. Moreover, they can be integrated with other systems like solar hot water systems and ground source heat pump systems to further improve energy efficiency. - Easy Operation and Maintenance: The operation and maintenance of WNS Low-Nitrogen Condensing Hot Water Boilers are straightforward...

The main benefits of installing expansion tanks in a thermal oil heater include: - Alleviating thermal expansion and contraction: During operation, the thermal oil heater experiences thermal expansion and contraction due to temperature changes. The expansion tank provides space to accommodate the expansion of thermal oil, mitigating the impact on equipment and pipelines caused by thermal expansion and contraction, and preventing stress concentration and equipment deformation due to thermal expansion and contraction. - Protecting equipment and pipelines: The expansion tank absorbs the expansion and contraction of thermal oil, reducing impact and vibration on equipment and pipelines. This helps extend the service life of equipment and pipelines, reducing the frequency of maintenance and replacements. - Reducing the risk of leaks: The expansion tank provides an enclosed space, minimizing the risk of thermal oil leaks. When thermal oil expands, excess oil can be accommodated through the expansion tank, preventing leaks and environmental pollution. - Facilitating maintenance and repair: The presence of an expansion tank makes it easier to maintain and repair the thermal oil heater system. When equipment or pipelines need to be repaired or replaced, the expansion tank can be used to control the flow and stoppage of thermal oil, reducing downtime and the difficulty of maintenance. - In summary, the expansion tank plays a role in alleviating thermal expansion and contraction, protecting equipment and pipelines, reducing the risk of leaks, and facilitating maintenance and repair in the thermal oil heater system. It is an important design element that contributes to enhancing the safety and reliability of the thermal oil heater system.

To optimize and improve the planning of gas boiler systems, consider the following aspects: 1. Energy Audit and Assessment: Conduct a comprehensive energy audit and assessment to understand the energy consumption of the gas boiler system and identify potential energy-saving opportunities. Through data analysis and energy measurement, determine the main sources of energy consumption and bottlenecks, providing a basis for subsequent optimization. 2. Combustion System Optimization: Optimize the combustion system of the gas boiler, including adjustments and cleaning of burners, control of gas-to-air ratios, and maintenance of the combustion chamber. Ensure high combustion efficiency and gas utilization, reducing energy waste. 3. Heat Recovery Utilization: Consider installing heat recovery devices such as waste heat recovery units or flue gas heat exchangers. These devices can utilize the excess heat in the flue gases emitted by the gas boiler to heat water or other equipment requiring heat, enhancing energy efficiency. 4. Pipe Insulation and Leak Inspection: Ensure that the insulation of gas and hot water pipes is effective to reduce energy loss. Regularly check for pipe leaks and make timely repairs to avoid energy waste and safety hazards. 5. Control System Upgrade: Consider upgrading the control system of the gas boiler with automated control technology. Through precise control and adjustment, achieve optimal operation of the gas boiler.

When operating gas boilers, there are three key points to be aware of: 1. Safe Operation: Gas boilers are thermal equipment and require careful handling. First, ensure that operators possess the necessary skills and knowledge, understanding the boiler's working principle and operational procedures. Secondly, strictly prohibit placing flammable materials around the boiler and maintain good ventilation. Additionally, regularly inspect and maintain safety devices such as relief valves and pressure gauges to ensure they function properly. 2. Proper Gas Supply Adjustment: The combustion of gas boilers requires an appropriate amount of gas supply. During operation, adjust the gas supply according to actual needs to ensure stable combustion. At the same time, regularly check the sealing integrity of gas pipelines and valves to prevent gas leaks. 3. Regular Maintenance and Cleaning: Regular maintenance and cleaning are crucial for the continued operation and extended lifespan of gas boilers. Regularly inspect all boiler components, clean burners, flues, and heat exchangers of accumulated soot and dirt to ensure efficient heat transfer and combustion. Moreover, regularly replace filters and clean water treatment equipment to maintain clean water quality, preventing scale and corrosion. It should be noted that these three points are basic operational guidelines, and specific operational and maintenance requirements may vary depending on the model and specifications of the gas boiler. Therefore, it is advisable to refer to the boiler's operation manual or consult experts before operating a gas boiler to ensure correct and safe operation.
Our company attaches great importance to technological innovation and research and development, boasting 1 municipal-level enterprise technology center in Heze City. We have established testing facilities for non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and more, equipped with over 600 instruments and equipment including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. Our key products and technologies, such as thermal pressure vessel welding, biomass boiler emission reduction, and waste heat utilization, have successively been shortlisted for multiple Shandong Provincial Department of Industry and Information Technology Science and Technology Innovation projects, key provincial projects, and Heze City innovative and excellent projects. We have cumulatively obtained 27 authorized utility model patents, 16 authorized invention patents, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. Our technical team, in collaboration with Professor Yajiang Li of Shandong University, has developed deep cryogenic container processing technology using the internationally recognized plasma arc + wire filling argon arc welding (PAW-GTAW) technique, which has been appraised as reaching international standards in the field of deep cryogenic container manufacturing at the provincial level.
Choose ZJET's customized solutions, join hands to create brilliance together!