Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has seven business centers: boiler, deep-freezing container, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. Currently, there are 710 employees, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong." In August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
A gas thermal oil heater is a device that uses gas as fuel and transfers heat energy through thermal oil. Its features include: - High thermal efficiency: The gas thermal oil heater uses thermal oil as the heat transfer medium, offering high heat transfer efficiency. The thermal oil has high thermal conductivity and stability, enabling rapid heat transfer and improving energy utilization efficiency. - Temperature control: By controlling the gas supply and thermal oil circulation, the gas thermal oil heater can achieve temperature control for the working environment. This temperature control meets various process and production requirements, enhancing production efficiency and product quality. - Safety and reliability: The gas thermal oil heater employs a closed-loop system, with the combustion process occurring in an enclosed environment, reducing the risk of gas leakage. Additionally, the thermal oil has a high flash point and ignition point, making the combustion process relatively safe and reliable. - Flexibility: The gas thermal oil heater is suitable for various industrial fields, such as chemicals, textiles, and food processing. It can adapt to different process requirements and working conditions, offering strong flexibility. - Environmental protection and energy saving: The gas thermal oil heater emits relatively low exhaust gas during combustion, causing minimal environmental pollution. Thanks to its high thermal efficiency and temperature control, it can save energy consumption and reduce energy costs. It is important to note that regular inspection and maintenance of the gas thermal oil heater are necessary to ensure its proper operation and extend its service life. Moreover, selecting the appropriate model and supplier of the gas thermal oil heater is crucial for ensuring its features and performance.

The gas steam boiler's annual gas consumption for a one-ton model depends on various factors, including the efficiency of the boiler, load conditions, and operating hours. Generally, it can be estimated using the following formula: Gas Consumption (m) = Boiler Thermal Efficiency × Boiler Rated Thermal Power × Operating Hours. Here, the boiler thermal efficiency refers to the boiler's energy utilization efficiency, typically expressed as a percentage; the boiler rated thermal power is the boiler's rated thermal output, usually in kilowatts (kW); and the operating hours are the time the boiler is in operation, typically measured in hours. It should be noted that the boiler's thermal efficiency and rated thermal power can be determined based on the specific model and parameters of the boiler, while the operating hours need to be estimated based on actual usage. Therefore, to accurately calculate the annual gas consumption of a one-ton gas steam boiler, it is recommended to refer to the technical specifications and operating records of the boiler, or consult the boiler manufacturer or engineer.

In the burner of a thermal oil furnace, adjusting the air shutter under low flame conditions is crucial. Here are some common sense tips and注意事项: The function of the air shutter: The air shutter is a key component in the burner that controls the supply of combustion air. By adjusting the opening of the air shutter, the flow of combustion air can be controlled, thereby affecting the oxygen supply and combustion effect during the combustion process. Adjusting under low flame conditions: Under low flame conditions, the burner needs to maintain stable combustion to ensure combustion efficiency and heat output. In this case, it is necessary to adjust the opening of the air shutter appropriately to maintain an adequate supply of combustion air. Generally, the opening of the air shutter is relatively small under low flame conditions to maintain an appropriate oxygen supply and avoid incomplete combustion or instability. The ratio of combustion air to fuel: Under low flame conditions, it is necessary to ensure that the ratio of combustion air to fuel is appropriate. Too much combustion air can lead to incomplete combustion and energy waste, while too little combustion air can lead to unstable combustion and the production of harmful gases. By adjusting the opening of the air shutter, the ratio of combustion air to fuel can be controlled to achieve a stable combustion effect. Burner tuning and optimization: During the installation and tuning of the burner of a thermal oil furnace, appropriate tuning and optimization are required. Through actual operation and monitoring, adjust the opening of the air shutter and other parameters to achieve the best combustion effect and energy efficiency performance. This requires...

Steam boiler equipment water treatment refers to the process of treating water in steam boilers to ensure normal operation and extend the lifespan of the equipment. Below is some basic knowledge about steam boiler equipment water treatment: Water Quality Requirements: The water quality in steam boilers is of high importance, typically requiring the removal of impurities, dissolved oxygen, and hardness substances. Impurities and hardness substances can lead to scaling and corrosion on the boiler's interior walls, while dissolved oxygen can cause corrosion and the formation of bubbles. Removal of Impurities: Common methods for removing water impurities include sedimentation, filtration, and ion exchange. Sedimentation involves adding chemicals to make impurities settle, filtration removes impurities through a filtering medium, and ion exchange uses resin to adsorb and exchange ions to remove impurities from the water. Hardness Adjustment: The hardness substances in water are mainly salts of calcium and magnesium, which can cause scaling on the boiler's interior walls. Hardness can be adjusted by adding chemicals or using water softening equipment to prevent scaling issues. Dissolved Oxygen Removal: Dissolved oxygen can cause corrosion and the formation of bubbles. It can be removed by adding oxidizing agents or using deaeration equipment. pH Control: The pH value of the water in steam boilers affects equipment corrosion and scaling. It is usually necessary to control the water pH within an appropriate range, using buffers or regulators to adjust the pH. Regular Testing and Maintenance: Regular water quality testing of the steam boiler equipment should be conducted, including measuring hardness, dissolved oxygen, and pH levels. Appropriate water treatment measures and maintenance should be performed based on the test results. Steam boiler equipment water treatment is a crucial aspect for ensuring normal boiler operation and extending equipment lifespan. Rational water treatment measures can effectively prevent scaling, corrosion, and malfunctions on the boiler's interior walls.
Shandong Zhongjie Special Equipment, welcome customers to our factory for cooperation discussions.