Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 staff, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Industry and Information Technology Department. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Carbon dioxide storage tanks feature the following characteristics: - High-pressure Storage: These tanks are commonly used for high-pressure storage and can withstand significant pressure. The carbon dioxide inside the tank exists in a gaseous or liquid state, with pressure typically ranging from tens to hundreds of megapascals (MPa). - High-density Storage: When stored in a liquid state, carbon dioxide has a higher storage density. Compared to gaseous storage, liquid storage allows for more carbon dioxide to be stored in a relatively smaller tank, enhancing storage efficiency. - Corrosiveness: Carbon dioxide has a certain degree of corrosiveness and can erode certain materials. As a result, carbon dioxide storage tanks are usually made from corrosion-resistant materials like stainless steel or alloy steel to ensure durability and safety. - Temperature Sensitivity: Carbon dioxide is in a gaseous state at room temperature but can turn into a liquid at lower temperatures. Therefore, carbon dioxide storage tanks often require good insulation to maintain low internal temperatures. - Safety Protection: These tanks are equipped with safety valves and pressure relief devices to control internal pressure and temperature, ensuring the safety of the storage process. Additionally, they must have excellent sealing performance to prevent leaks. - Wide Application: Carbon dioxide storage tanks are widely used in various industries, such as food and beverage, pharmaceutical, and chemical industries. They can be used for freezing food, refrigeration equipment, and gas supply, meeting diverse industry needs. In summary, carbon dioxide storage tanks possess features such as high-pressure storage, high-density storage, corrosiveness, temperature sensitivity, safety protection, and wide application. These characteristics make them crucial equipment for storing and using carbon dioxide in many industries.

以下是一些常见的二氧化碳储罐管理守则： 安全管理：建立完善的安全管理制度，包括安全操作规程、应急预案和事故处理程序等。确保操作人员具备必要的安全知识和技能，并定期进行安全培训和演练。 储罐检查和维护：定期检查储罐的外观、阀门、连接件等，确保其完好无损。定期进行泄漏检测和压力测试，确保储罐的安全性能符合要求。 液位监测和控制：定期监测储罐内的液位，确保储罐内的二氧化碳充足。根据需要进行充填或放空操作，维持适当的液位。 废气处理：处理二氧化碳储罐产生的废气，避免对环境造成污染。采取适当的废气处理措施，如收集和处理废气。 防火防爆措施：采取防火防爆措施，确保储罐周围的环境安全。远离火源、高温区域和易燃物质，定期检查和维护防火设施。 标识和警示：储罐应明确标识，包括储存的气体类型、压力等信息。周围应设置警示标志，提醒人员注意储罐的存在和相关安全注意事项。 储存记录：记录储罐的使用情况，包括充填日期、充填量、检查记录等。定期进行储罐的检测和维护，并保留相关记录。 定期审查和改进：定期审查储罐管理制度和操作流程，及时发现问题并进行改进。根据实际情况进行风险评估和管理，提高管理水平和安全性能。 需要注意的是，具体的管理守则可能会因不同的储罐类型和应用而有所不同。在管理二氧化碳储罐时，应根据相关的规范和标准进行操作，并咨询人士以确保安全和有效性。

Additionally, the use of liquid carbon dioxide tanks must adhere to specific industry standards and regulations depending on the industry and application scenario. For instance, when using liquid carbon dioxide tanks in the food and beverage industry, relevant food safety and hygiene standards must be followed. It's important to note that different regions may have varying standards and regulations applicable to the use of liquid carbon dioxide tanks. Therefore, operations and usage should be conducted in accordance with local laws and standards.

In daily operation, CO2 storage tanks require protection and maintenance to ensure proper functioning and safety. Here are some common protection and maintenance methods: - Appearance Inspection: Regularly check the tank's exterior for signs of corrosion, wear, and cracks. If any anomalies are detected, take prompt repair actions. - Seal Integrity Check: Regularly inspect the tank's sealing performance, particularly at valve connections, pipe joints, and the tank's own seal. Ensure there are no leaks, and repair any found promptly. - Temperature Control: Maintain a suitable ambient temperature around the tank and implement insulation measures to ensure the tank's internal低温 state. - Pressure Relief Device Inspection: Regularly check the tank's pressure relief devices, such as safety valves, to ensure they are operating correctly. Verify that the set pressure meets requirements and perform regular maintenance and replacements. - Level Monitoring: Regularly monitor the tank's liquid level to ensure accurate measurements. If an abnormal level is detected, promptly investigate the cause and take appropriate actions. - Regular Cleaning: Clean the tank's interior regularly to remove accumulated impurities and dirt. Exercise safety during cleaning and avoid using flammable or corrosive substances. - Regular Testing: Conduct regular pressure tests and leak inspections on the tank to ensure safety performance meets requirements. The frequency and methods should comply with relevant regulations and standards. - Storage Capacity Control: Control the tank's storage capacity to prevent exceeding the rated capacity. Overfilling can lead to excessive pressure and increased safety risks. - Note: Specific protection and maintenance methods may vary depending on the type of tank and its application.
Zhong Jie Special Equipment upholds the grand vision of "realizing employees' dreams, creating customer value, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We offer society high-quality and cost-effective products and services!