Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three manufacturing sites on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 staff, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The inspection content and requirements for gas-fired boilers typically include the following aspects: - Safety Valve and Pressure Gauge: Check the installation and securing of the safety valve and pressure gauge to ensure proper operation and accurate pressure display. - Combustion System: Inspect the burner's operational status, including ignition, combustion, and stability. Verify the connections of the gas supply pipes and valves to ensure no leaks. - Flue and Heat Exchanger: Check the cleanliness of the flue and heat exchanger, for any accumulated dust and dirt, to ensure heat exchange efficiency and smoke emissions meet requirements. - Water Level Control System: Inspect the operational status of the water level controller and gauge to ensure accurate and reliable water level control, preventing overfilling or low water levels. - Gas Supply System: Check the installation and connections of the gas supply pipes and valves to ensure normal gas supply and no leaks. - Electrical System: Inspect the wiring and connections of the electrical system, including power supply, controllers, and sensors, to ensure normal operation of electrical equipment and avoid electrical failures. - Safety Devices: Check the operational status of safety devices, including safety valves, pressure switches, and temperature controllers, to ensure proper functioning and guarantee safe boiler operation. - Records and Documents: Review the boiler's operational, maintenance, and inspection records to ensure completeness and accuracy of the running and maintenance records. The inspection of gas-fired boilers should be conducted by an institution or personnel with the relevant qualifications, adhering to relevant laws, regulations, and standards. The frequency and specific requirements for the inspection can be determined based on the boiler's usage and local regulations. Timely inspections and maintenance ensure safe and efficient operation of gas-fired boilers.

When designing a fuel-gas boiler room, the following points should be considered: Safety considerations: Ensure the design of the boiler room complies with relevant safety standards and regulations. Consider fire risks and install appropriate firewalls, fire doors, and fire isolation facilities. Ensure the boiler room has good ventilation, equipped with suitable ventilation equipment and flue systems to expel harmful gases produced by combustion. Space and layout: Plan the space and layout of the boiler room according to the number and size of the boilers. Ensure there is sufficient space for operation, maintenance, and cleaning. Arrange the boilers, fuel storage equipment, flue systems, and pipe layouts in a way that facilitates operation and maintenance. Fuel supply and storage: Consider the requirements for fuel supply and storage. Ensure the safety and reliability of fuel supply pipelines and equipment, avoiding leaks and contamination. Plan the capacity and location of fuel storage equipment reasonably, ensuring an adequate fuel supply and compliance with relevant safety requirements. Emission and exhaust gas treatment: Consider the exhaust gas emissions and treatment from combustion. Install appropriate flue systems and exhaust gas treatment equipment to minimize the impact of exhaust emissions on the environment. Ensure the design and layout of the flue system are reasonable and can effectively expel smoke and exhaust gases. Control and monitoring systems: Design appropriate control and monitoring systems to ensure the safety and operation of the boiler. This includes monitoring and control equipment for parameters such as temperature, pressure, and flow, as well as alarm and automatic shutdown devices. Ensure operators can promptly understand the operation status of the boiler and take necessary actions.

To extend the service life of steam boilers, the following measures can be taken: Regular maintenance: Perform regular maintenance on the boiler, including cleaning the burner, flue, and heat exchanger, inspecting and replacing worn parts, ensuring normal operation and efficiency. Water quality control: Maintain good water quality in the boiler to prevent scale and corrosion from damaging the boiler. Conduct regular water quality tests and take appropriate water treatment measures based on test results, such as descaling and replenishing missing chemicals. Control the combustion process: Reasonably control the combustion process to ensure normal operation and combustion efficiency of the burner. Regularly inspect the burner's operating condition, adjust combustion parameters, and avoid issues like overheating or underheating. Regularly clean the flue and heat exchanger: Regularly clean the flue and heat exchanger to remove accumulated dust and dirt, maintain heat exchange efficiency, and avoid overheating and energy loss. Regularly inspect safety devices: Regularly inspect the safety devices of the boiler, including safety valves, pressure switches, and water level controllers, to ensure normal operation and safe operation of the boiler. Keep records and monitor: Record the operating parameters, maintenance records, and failure conditions of the boiler, regularly monitor and analyze them, and promptly identify and address issues. Train operators: Ensure that operators have sufficient knowledge of boiler operation and maintenance, operate and maintain the boiler correctly, and avoid damage caused by operational errors and improper maintenance. Regularly carry out inspections: Based on the boiler's usage and the manufacturer's recommendations, regularly perform major repairs and inspections, replace worn-out parts, and extend the service life of the boiler. These measures can help extend the service life of steam boilers, but please note that for safety and effectiveness, maintenance and inspections should be carried out by qualified personnel.

When selecting a steam boiler, several key factors should be taken into account: - Steam Demand: First, determine the steam requirements of the factory or project, including steam pressure, flow rate, and quality. Choose an appropriate boiler model and specification based on actual needs to ensure it meets the process and production requirements. - Boiler Type: There are various types of steam boilers, such as fire-tube boilers, water-tube boilers, and gas boilers. Select the suitable type of boiler based on the factory's actual conditions and needs. Also, consider the fuel type, such as coal, gas, or biomass, and choose a fuel type that complies with the factory's energy supply and environmental protection requirements. - Boiler Efficiency: The efficiency of the boiler directly impacts energy utilization efficiency and operating costs. Understand the boiler's thermal and combustion efficiency and choose a high-efficiency steam boiler to reduce energy consumption and operating costs. - Quality and Reputation: Choose a supplier with a good reputation to ensure the quality and reliability of the steam boiler. Refer to customer reviews, industry certifications, and ratings to understand the supplier's reputation and product quality. - Technical Support and After-Sales Service: Select a supplier that can provide comprehensive technical support and after-sales service. Ensure the supplier can offer installation guidance, training, maintenance, and troubleshooting support to ensure the normal operation and maintenance of the steam boiler. - Cost and Budget: Finally, choose a steam boiler that fits within your budget and economic considerations. Consider the purchase cost, operating cost, and maintenance cost, and select a steam boiler with a high cost-performance ratio. It's important to note that the above factors are just some of the key considerations when purchasing a steam boiler. The specific choice should be determined based on the factory's actual conditions and needs. It is recommended to communicate and compare with multiple suppliers to gather more information and advice for an informed decision.
Our company highly values technological innovation and R&D design. We possess a municipal-level enterprise technology center in Heze City, equipped with non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and other testing facilities. We have over 600 types of equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. The key products and technologies we have developed, such as welding of temperature and pressure vessels, biomass boiler emissions reduction, and waste heat utilization, have successively been selected for multiple Shandong Provincial Department of Industry and Information Technology science and technology innovation projects, key projects in Shandong Province, and Heze City innovation and excellence projects. We have cumulatively obtained 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. Our technical team, in collaboration with Professor Yajiang Li from Shandong University, has developed deep cryogenic vessel processing technology using the internationally recognized plasma arc + wire filling argon arc welding (PAW-GTAW) technology. This technology has been appraised as internationally competitive at the provincial level in the field of deep cryogenic vessel manufacturing.
Choose ZJET's custom solutions, let's create brilliance together!