Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as a mechanical and electrical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the理事 member of the Shandong Equipment Manufacturing Association. The company has also passed the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System certifications, and the American ASME/U2 certification.
If a leak in the CO2 storage tank is detected, the following steps should be taken immediately: Confirm the leak location: First, identify the exact location of the leak, which can be done through hearing, observation, or using gas detection equipment. Emergency response: If a leak is found, take immediate emergency measures to ensure personnel safety. Evacuate people to a safe area and notify relevant personnel and emergency agencies. Cut off the gas supply: As soon as possible, shut off the CO2 supply source by closing valves or cutting off power to stop the supply of CO2. Locate the leak: In a safe environment, use gas detection equipment or visual inspection to find the leak. Apply soap water or other leak detection agents to potential leak points and observe for bubble formation. Seal the leaks: Once the leak location is confirmed, take temporary sealing measures, such as using tape, sealant, or other reliable sealing materials for temporary repairs. Ensure that the sealing measures are secure and can effectively prevent gas leakage. Repair and maintenance: In a safe environment, perform further repairs and maintenance. Depending on the specific situation of the leak, it may be necessary to replace seals, repair or replace valves, etc. Repair and maintenance work should be carried out by personnel. Inspection and testing: After repairs and maintenance, conduct leak detection and testing to ensure that the leaks have been completely repaired and the tank's safety performance has returned to normal. It is important to handle CO2 storage tank leak issues with caution and follow relevant safety regulations and procedures. If you do not have the necessary knowledge and skills, contact a professional for assistance.

Carbon dioxide storage tanks feature the following safety technical characteristics: - High-strength materials: Storage tanks are typically made of high-strength steel or alloy materials to withstand stress and loads under high pressure and low-temperature environments. - Safety valves and pressure relief devices: Equipped with safety valves and pressure relief devices to control internal tank pressure and prevent overpressure and explosions. The safety valve will automatically open to release pressure when the internal tank pressure exceeds the set value. - Insulation layer: The tank interior is insulated to minimize heat transfer and liquid evaporation. The insulation layer usually consists of multi-layer structures, including thermal insulation materials and an external protective layer, to maintain a stable internal temperature. - Level monitoring and control: The tank is equipped with level monitoring devices to monitor the liquid level inside. Timely monitoring and control of the level ensure the liquid storage within the tank remains within a safe range. - Fire and explosion prevention measures: Fire-resistant coatings, fire-isolation zones, and explosion-proof devices are implemented to prevent fires and explosions. - Leak detection and alarm system: The tank is equipped with a leak detection and alarm system for timely detection and alerting of any leaks. Quick response and handling can reduce the safety risks caused by leaks. - Regular inspections and maintenance: Tanks require regular inspections and maintenance, including visual inspections, valve maintenance, and pressure tests, to ensure the tank's safety performance and reliability. - It should be noted that the specific safety technical characteristics of carbon dioxide storage tanks may vary depending on the type and application of the tank. When using carbon dioxide storage tanks, it is necessary to comply with relevant regulations and standards.

When selecting a CO2 storage tank support, consider the following factors: Load Capacity: The design and selection of the support should be able to bear the weight and pressure of the tank. The load-bearing capacity of the support should be determined based on the tank's dimensions, weight, and working conditions. Stability: The support should have sufficient stability to prevent tilting or collapse of the tank during use. The design of the support should take into account the center of gravity location and changes in the tank to provide stable support. Corrosion Resistance: As CO2 is somewhat corrosive, the material choice for the support should have good corrosion resistance to prevent corrosion and damage. Installation and Maintenance Ease: The design of the support should consider ease of installation and maintenance to facilitate the installation, adjustment, and maintenance of the tank. Compliance with Standards and Regulations: The design and selection of the support should comply with relevant standards and regulations, such as Standard GB150 "Steel Pressure Vessels." Additionally, other factors related to the support can be considered, such as cost, reliability, and durability. When selecting a support, consult engineers or consulting companies for advice and guidance.

When applying paint to carbon dioxide storage tanks, attention should be given to the following issues: Surface Preparation: Prior to painting, thorough surface preparation of the tank is essential. This involves cleaning the surface, removing grease, dirt, and old coatings to ensure the paint adheres properly and maintains quality. Paint Selection: Choosing the right paint for carbon dioxide storage tanks is crucial. The paint should be corrosion-resistant, heat-resistant, and chemical-resistant to protect the tank surface from corrosion and damage. Painting Technique: The selection and operation of painting techniques are vital for the quality and evenness of the coating. Appropriate painting equipment and methods should be chosen to ensure the paint covers the entire tank surface evenly, avoiding drips and runs. Coating Thickness: The thickness of the coating is critical for the tank's protection. The thickness should be controlled according to the paint requirements and the tank's operating environment to ensure the coating's protective performance and lifespan. Drying and Curing: After the coating is applied, sufficient time must be allowed for drying and curing. Follow the correct drying time and conditions as specified by the paint to ensure the coating's quality and performance. Safety Measures: Appropriate safety measures must be taken during the painting process, including wearing protective eyewear, respirators, and protective clothing to ensure the safety of the operators. Quality Inspection: After painting is complete, a quality inspection should be conducted, including the appearance, adhesion, and thickness of the coating. Any issues or defects should be addressed and repaired promptly. It should be noted that painting carbon dioxide storage tanks should be performed by professionals.
Zhongjie Special Equipment upholds the grand vision of "Realizing the dreams of our employees, creating value for our customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We offer society products and services with high performance and cost-effectiveness!