Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boiler, deep-freeze vessel, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory areas on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineering and technical personnel and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Department of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When installing a biomass boiler, the following aspects should be taken into consideration:
Safety Distance: Biomass boilers should maintain adequate safety distances from other equipment, buildings, etc., to prevent fires and safety accidents.
Ventilation and exhaust: Biomass boilers require an effective ventilation and exhaust system to ensure that flue gases produced during the combustion process are promptly expelled, preventing indoor accumulation and potential health hazards.
Fuel Storage: Biomass boilers require appropriate fuel storage facilities, such as fuel silos or stacking areas. The fuel storage area should be dry, well-ventilated, and fire prevention measures should be taken to prevent spontaneous combustion and fires.
Pipe Connections: Pipe connections for biomass boilers must be sturdy and reliable to ensure normal operation of fuel supply, flue gas exhaust, and water circulation. Suitable sealing materials should be used at the pipe connection points to prevent leaks and energy loss.
Control System: The control system for biomass boilers should be reliable and stable, capable of accurate control and adjustment of parameters such as temperature, pressure, and fuel supply. The control system should be equipped with safety protection features, such as overheat protection and low water level protection.
Regular Maintenance: Biomass boilers require regular maintenance and care, including cleaning the combustion chamber, inspecting pipes and valves, and clearing the flue and dust removal equipment. Regular maintenance ensures the normal operation and combustion of biomass boilers.
Compliance Requirements: When installing biomass boilers, it is necessary to adhere to relevant laws, regulations, and standards, such as safety production regulations and environmental protection requirements. Ensure that the installation of biomass boilers complies with specifications, guaranteeing safety and environmental protection.
Above are some things to note when installing biomass boilers to ensure safe and environmentally friendly operation. During the installation process, be

Advantages of Biomass Fuel:
Renewable Energy: Biomass fuel is a renewable energy source with a wide range of sources, including wood, straw, and waste, making its supply more sustainable compared to fossil fuels.
Environmental Low Carbon: The amount of carbon dioxide emitted during the combustion of biomass fuel is basically equivalent to the amount absorbed during its growth process, resulting in almost no net increase in carbon dioxide emissions, which has a cumulative effect in mitigating climate change.
Reduce Waste Disposal: Biomass fuel can utilize agricultural straw, wood waste, and other waste materials, thereby reducing waste disposal and emission issues.
High energy utilization efficiency: Biomass fuel has a high calorific value and burns efficiently, effectively converting to heat or electricity, providing a reliable energy supply.
The use of biomass boilers:
Heating Systems: Biomass boilers can be used in heating systems such as central heating, warm water, and steam supply, widely applied in residential areas, industrial plants, and commercial buildings.
Industrial Production: Biomass boilers provide thermal energy for industrial production, such as in the pulp and paper, food processing, and chemical industries, meeting the thermal energy demands throughout the production process.
Power Generation System: Biomass boilers can be combined with steam turbine generator sets to convert the heat energy from combustion into electrical power for power supply.
Hot Water Supply: Biomass boilers can be used for hot water supply, such as for swimming pools, hot springs, hotels, and other similar facilities.
Agricultural Utilization: Biomass boilers can utilize agricultural waste like crop straw to address energy issues in rural areas, providing the required thermal energy for agricultural production.
The use of biomass boilers is environmentally friendly, sustainable, and efficient, effectively utilizing biomass resources, reducing dependence on fossil fuels, lowering carbon emissions, and promoting sustainable development.

When operating biomass boilers, the following safety precautions should be noted:
Familiarize with the Operation Manual: Before operating the biomass boiler, carefully read and familiarize yourself with the operation manual to understand the boiler's structure, working principle, operating steps, and safety precautions.
Regular inspections and maintenance: Conduct regular checks on all components and equipment of the boiler to ensure proper operation and safety performance. Promptly clean ash and slag, inspect the sealing of pipes and valves, and maintain the boiler's cleanliness and unobstructed flow.
Regulate Fuel Supply: Control the rate and amount of fuel supply to prevent either too fast or too slow delivery, ensuring complete combustion of fuel and reducing safety risks.
Maintain controlled combustion temperature: Keep the combustion temperature at an appropriate level, avoiding both too low and too high temperatures. Excessively low temperatures can lead to coking, while excessively high temperatures may cause incomplete combustion and safety hazards.
Regular cleaning and maintenance of the combustion chamber: Regularly clean ash and carbon deposits from the combustion chamber to maintain the boiler's cleanliness and prevent issues like scaling and blockages.
Safety valves and pressure gauges: Ensure the proper operation and accuracy of safety valves and pressure gauges; promptly repair or replace any damaged safety valves and pressure gauges.
Prevent overheating and overpressure: Monitor the boiler's temperature and pressure to avoid overheating and overpressure, and take timely measures for adjustment and treatment.
Prevent Gas Leaks: Regularly inspect the sealing of gas pipes and valves to ensure no gas leaks occur, avoiding risks of fire and explosion.
Pre-shutdown Procedures: Prior to shutdown, first turn off the fuel and air supplies, then wait for the boiler to cool down before proceeding with maintenance and cleaning tasks.
Training and Operating Procedures: Ensure that operators have received relevant training, are familiar with operating procedures and emergency response measures, and can handle emergencies correctly.
Above are some safety precautions to be aware of when operating a biomass boiler. To ensure the safe operation of the boiler, it is recommended to follow relevant operational procedures and safety standards, and to conduct regular inspections and maintenance.

High evaporation rate of biomass pellet boiler fuel may lead to the following issues:
Incomplete combustion: High volatility fuel releases a large amount of steam during combustion, which lowers the combustion temperature and affects the completeness of combustion. Incomplete combustion leads to energy loss and increased emissions, reducing the boiler's thermal efficiency and environmental performance.
Poor combustion stability: Fuels with high volatility are prone to instability in the combustion process, which may result in flameout and uneven combustion. This can lead to unstable operation of the boiler and affect the stability of hot water supply.
To address issues caused by high-evaporation fuel, the following measures can be taken:
Combustion System Optimization: Optimize the combustion system of biomass pellet boilers, including aspects such as combustion chamber design, combustion air supply, and mixing. Enhance combustion completeness and stability through measures like increasing combustion temperature and oxygen supply.
Combustion Control: Utilizes a combustion control system that monitors and adjusts parameters such as temperature and oxygen content in real-time during the combustion process. Adjusts the supply of combustion air based on actual conditions to maintain stability and completeness of combustion.
Fuel Pretreatment: Pre-treat biomass pellet fuel with high volatile matter content, such as drying and crushing. By reducing the moisture content and particle size of the fuel, it decreases the volatile matter content and enhances the efficiency and stability of combustion.
Burn parameter adjustment: Adjust the boiler's burn parameters based on actual conditions, such as burn temperature and duration. Through reasonable parameter adjustments, make the combustion process better suited to the characteristics of high evaporation fuel.
In summary, by optimizing the combustion system, adjusting control mechanisms, pre-treating the fuel, and modifying combustion parameters, issues caused by high evaporation in biomass pellet boiler fuel can be reduced, and the efficiency of the boiler can be improved.
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.