Detailed Description

The GBW type concentrated sulfuric acid pump is optimized for performance parameters of the IS type centrifugal pump, utilizing special cast iron and carbon steel materials for concentrated sulfuric acid and an excellent hydraulic model. It is an ideal new generation chemical pump.

Product Features:

GBW type sulfuric acid pumps feature an external-mounted high-quality mechanical seal. The dynamic and static rings are made of new hard alloy or ceramic, offering wear resistance, no leakage, and a long service life. Installation, operation, precautions, and maintenance instructions.

1. Thoroughly inspect the pump housing flow path for any hard particles before installation to prevent damage to the impeller and pump housing during operation.

2. A regulating valve must be installed on the inlet and small pipe of the pump to control its operation within the rated conditions.

3. Open the import valve to fill the entire pump chamber with liquid.

4. Power on, once the pump reaches normal speed, gradually open the valve on the discharge pipe and adjust it to the desired operating condition.

5. Check for temperature rise ≤70℃ at the motor and bearing area, and handle any anomalies promptly.

6. Absolutely no mechanical seals to be operated under dry grinding conditions.

Model Significance:

GBW Type Concentrated Acid Pump

GBW 50-100

GBW-Centrifugal Pump for Concentrated Sulfuric Acid

50 - Inlet Diameter (mm)

100 - Impeller Nominal Diameter (mm)