Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as an electromechanical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the Council Member of the Shandong Equipment Manufacturing Association. The company has also passed the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System certifications, and the American ASME/U2 certification.
If a gas boiler gas leak is detected, the following measures must be taken immediately to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilate the area: Open windows and doors to ensure good indoor air circulation and expel any remaining gas. This lowers the gas concentration indoors and reduces the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: Do not use open flames or electrical devices in the event of a gas leak to prevent fire or electrical sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to avoid causing sparks that could lead to an accident. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leak and request them to inspect and handle the situation. 6. Do not use a phone or make calls: In cases of suspected gas leakage, do not use a phone or make calls to avoid static electricity causing an explosion. 7. Keep away from the leak area: Stay as far away from the leak area as possible to ensure your safety. Avoid approaching the gas boiler and the leak point to prevent injury. Remember, handling a gas boiler gas leak is a dangerous task that requires caution. It is best handled by trained personnel to ensure safety.

Excessive exhaust gas temperature in a thermal oil boiler may be due to several reasons: Incomplete combustion: If the fuel in a thermal oil boiler is not fully combusted, it leads to a high concentration of unburned fuel and harmful substances in the flue gas, raising the exhaust gas temperature. Possible causes include insufficient fuel supply, improper burner adjustment, and burner wear. Excessive air: Excess air can lower the combustion temperature, making the heat in the flue gas insufficient to reduce the temperature to a reasonable level. Causes may include improper burner adjustment and excessively open air doors. Flue blockage: Accumulated ash, coking, or other impurities in the flue can obstruct flue gas flow, increasing the residence time and raising the exhaust gas temperature. Abnormal thermal oil flow: Abnormal thermal oil flow, either too high or too low, can lead to uneven heat transfer, raising the flue gas temperature. Boiler overheating: Improper temperature control in a thermal oil boiler can cause overheating, increasing the exhaust gas temperature. Boiler design issues: Design problems, such as a narrow flue or poor flue gas flow, can also cause excessive exhaust gas temperature. To address the issue of high exhaust gas temperature, a comprehensive inspection and analysis of the thermal oil boiler is required. Solutions may include adjusting burner parameters, cleaning the flue, checking thermal oil flow and temperature control. In severe cases, boiler system modification or repair may be necessary. Additionally, regular maintenance and inspections are crucial preventive measures against excessive exhaust gas temperature.

Common faults of gas boiler burners and their solutions are as follows: 1. No flame or unstable flame: Check if the gas supply is normal and ensure the gas valve is open. Clean the burner nozzle to ensure the passage is clear. Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the gas-to-air ratio to ensure the correct mixture. 2. Incomplete combustion or black smoke: Check if the gas supply is sufficient and adjust the gas pressure. Clean the burner nozzle and combustion chamber to ensure the passage is clear. Adjust the gas-to-air ratio to ensure the correct mixture. Check for carbon buildup or dirt in the burner and clean or replace damaged parts. 3. Difficulty or failure to ignite: Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the position and gap of the ignition electrode to ensure normal spark generation. Check if the ignition transformer or controller is functioning properly, repair or replace damaged parts. 4. Abnormal noise from the burner: Check if the gas supply is normal and ensure the gas valve is open. Inspect the burner and combustion chamber for loose parts, tighten or replace damaged parts. Clean the burner and combustion chamber to ensure no carbon buildup or dirt. If the above methods do not solve the problem, it is recommended to contact a gas boiler maintenance technician for inspection and maintenance. Additionally, to ensure safety, follow the relevant safety operating procedures when using a gas boiler.

Safety requirements for steam boiler valves mainly include the following aspects: Valve Selection: Choose valve types and specifications suitable for steam boilers. Valves must comply with relevant standards and specifications, and possess characteristics such as high-temperature resistance, pressure resistance, and corrosion resistance. Valve Installation: Valves should be installed correctly at the corresponding positions on the steam boiler. During installation, ensure the connections are secure and sealed reliably to prevent leaks and loosening. Valve Operation: Valve operation should be easy and flexible, allowing for accurate control of steam flow and pressure. Handles or devices should indicate the opening and closing directions of the valve, as well as the corresponding operation methods. Valve Sealing: Valve sealing performance is crucial. Valves should have good sealing properties to prevent steam leakage and energy loss. The sealing surface should be flat and smooth, and able to withstand high temperatures and wear. Valve Maintenance: Regularly inspect and maintain valves to ensure their normal operation and safety performance. This includes cleaning valves, checking sealing surfaces, lubricating moving parts, and promptly repairing or replacing damaged components. Safety Valve: Safety valves must be installed on steam boilers to protect the safe operation of the boiler. Safety valves must comply with relevant standards and specifications and should automatically open to release excess pressure steam when overpressure occurs, preventing boiler explosions. Valve Identification: Valves should be marked with their type, specifications, working pressure, and flow rate information. This helps operators correctly identify and operate valves, avoiding incorrect operation and accidents. It is important to note that the above safety requirements are general guidelines. Specific safety requirements should be determined based on the type, scale, and operating environment of the steam boiler. When using valves, follow relevant laws, regulations, and safety operation procedures to ensure safe and effective control of the valves.
Shandong Zhongjie Special Equipment, welcome customers to our factory for business discussions.