The LRD-1151 remote transducer can prevent contact between the medium being measured and the isolation diaphragm of the transducer, and is suitable for the following situations:

1. When the medium being tested has a corrosive effect on the transmitter's connection and sensitive components;

2. When it's necessary to isolate the high-temperature medium being measured from the transmitter;

3. In the medium being tested, there are solid suspended particles or high viscosity substances that may cause blockages at the transmitter connection and pressure chamber.

4. When the medium being tested is prone to solidify or crystallize through the pressure gauge tube.

5. When replacing the medium being tested requires flushing without mixing.

6. Sanitation must be maintained to prevent contamination.

Measurement Range: 0-6 kPa to 10 MPa

Offer a variety of structural materials; long-distance device components feature strong welding structures; low-volume liquid filling cavity design; minimizes temperature impact.

According to customer requirements, standard silicone oil or high-temperature silicone oil can be filled internally. For corrosive mediums, select an isolation diaphragm material.

Structural Dimensions: