Shandong Zhongjie Special Equipment's main products include: fuel (gas) boilers, organic heat carrier boilers, biomass boilers, waste heat recovery boilers, and other boiler products; vacuum insulation deep-freeze pressure vessels such as LNG storage tanks, oxygen-nitrogen-argon storage tanks, CO2 storage tanks, etc.; pressure vessel products like denitrification engineering equipment, heat storage and energy storage equipment, complete chemical equipment sets, etc.; central air conditioning and ventilation equipment such as ground (water) source heat pumps, air source units, water-cooled screw units, and air-cooled modules. Planned products include large-scale energy centers, LNG transport vehicles, LNG tank containers, and other green energy equipment.
Common defects that may occur during the use of carbon dioxide storage tanks include deformation. Here are some reasons that may lead to tank deformation: Overpressure: When the internal pressure of the tank exceeds its design pressure, it may cause deformation. This could be due to operational errors, system failures, or other causes. Temperature Fluctuations: Carbon dioxide tanks expand and contract with temperature changes, and if the temperature fluctuates too much or too quickly, it may result in tank deformation. Internal Corrosion: If there are corrosion issues inside the tank, the corrosion can damage the structural integrity of the tank, leading to deformation. External Damage: External impacts, compressions, or other physical damages may cause tank deformation. Incorrect Installation or Use: Incorrect installation or usage methods may lead to uneven stress on the tank, causing deformation. Tank deformation may reduce the structural integrity of the tank and even pose risks of leakage or rupture. Therefore, it is important to regularly inspect and maintain the integrity of the tank, as well as to follow proper operational and installation procedures. If tank deformation or other defects are suspected, use of the tank should be immediately stopped, and professional assistance should be sought for inspection and repair. Do not attempt to repair or continue using a defective tank yourself to ensure operational safety.

Key features of carbon dioxide storage tanks primarily include the following aspects: 1. High storage density: Carbon dioxide storage tanks can compress carbon dioxide gas into a liquid state, significantly increasing storage density. Compared to storing in its gaseous state, liquid carbon dioxide can store more carbon dioxide in relatively smaller tanks, saving space and costs. 2. Stable storage and supply: Carbon dioxide storage tanks can reliably store and supply carbon dioxide. Through the design and control systems of the tanks, precise measurement and supply of carbon dioxide can be achieved, meeting various industrial and application needs. 3. Environmental-friendly and renewable: Carbon dioxide is an environmentally friendly gas, and its increased concentration in the atmosphere can lead to warming and climate change. By storing and utilizing carbon dioxide, the amount released into the atmosphere can be reduced, achieving environmental protection and sustainable development. 4. Safe and reliable: During the design and manufacturing process, carbon dioxide storage tanks typically use high-strength materials (such as carbon steel or stainless steel) with good pressure resistance and safety. The tanks are usually equipped with safety valves, pressure gauges, level gauges, and other accessories to ensure safe operation. Additionally, carbon dioxide is a non-flammable and non-explosive gas, making it relatively safe. 5. Various application fields: Carbon dioxide storage tanks are widely used in multiple fields, including the food and beverage industry, fire protection, gas supply, and more. Carbon dioxide can be used as a food preservative, beverage effervescent agent, gas, and fire extinguisher, among other applications, with a broad range of uses and market demand. In summary, the key features of carbon dioxide storage tanks encompass high storage density, stable storage and supply, environmental-friendliness and renewability, safety and reliability, and diverse application fields. This makes carbon dioxide storage tanks an important...

When selecting a carbon dioxide storage tank support, consider the following factors: Load Capacity: The design and selection of the support should be capable of bearing the weight and pressure of the tank. The load-bearing capacity of the support should be determined based on the tank's size, weight, and working conditions. Stability: The support should have sufficient stability to prevent tilting or collapse of the tank during use. The design of the support should take into account the center of gravity position and changes of the tank to provide stable support. Corrosion Resistance: Due to the corrosive nature of carbon dioxide, the material choice of the support should have good corrosion resistance to prevent corrosion and damage. Ease of Installation and Maintenance: The design of the support should consider ease of installation and maintenance to facilitate the installation, adjustment, and maintenance of the tank. Compliance with Standards and Regulations: The design and selection of the support should comply with relevant standards and regulations, such as Standard GB150 "Steel Pressure Vessels." Additionally, other related factors such as cost, reliability, and durability can be considered. When selecting a support, consulting engineers or consulting companies can provide advice and guidance.

Carbon dioxide (CO2) and liquid oxygen (LOX) storage tanks are equipment used for storing different gases, with some differences in their physical properties: - Physical State: CO2 is a gas at room temperature and requires low temperatures and high pressure to convert to a liquid. LOX is a liquid at room temperature and can maintain its liquid state without special conditions. - Storage Temperature: The liquid CO2 storage temperature typically ranges from -40°C to -78.5°C, while the liquid oxygen storage temperature usually ranges from -183°C to -183.15°C. The storage temperature for LOX is lower, necessitating more stringent insulation measures. - Storage Pressure: The liquid CO2 storage pressure typically ranges from 5 to 20 MPa (megapascals), while the liquid oxygen storage pressure usually ranges from 0.2 to 2 MPa. The storage pressure for LOX is lower. - Density: The density of liquid CO2 is approximately 0.8 g/cm³, while the density of liquid oxygen is about 1.14 g/cm³. The density of liquid oxygen is greater. - Safety: LOX has a high oxygen content, making it highly flammable and oxidizing, requiring stricter safety measures. CO2 is relatively safe but can still be harmful to humans at high concentrations.
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.