Glass fiber reinforced plastic (GFRP) anti-corrosion, also known as epoxy glass fiber anti-corrosion for wastewater tanks, sewage pools, chemical solution tanks, and wastewater treatment stations.
Applicable Areas: Interior and exterior walls, floors, and ceilings of various tanks and pools in wastewater treatment stations; liquid storage tanks, press filter tanks, etc.
Construction Technology:
Surface Treatment: Repair and grind the original pool walls using a polishing machine.
2. Priming: Apply the mixed resin material evenly to the wall using a roller, ensuring complete penetration and adequate bonding to form a water-resistant and corrosion-resistant resin base layer.
3. Laying Fabric: Spread the glass fiber flat on the primer, then apply a layer of resin on the glass fiber, ensuring it is even, complete, and bubble-free (apply a layer of resin after each spread). After the resin cures, use a sanding machine to remove any lifted fabric edges between layers, making it smooth.
4. Intermediate Coating: After the glass fiber layer is fully cured, remove any surface burrs and protrusions. Then, apply the pre-mixed intermediate coating evenly over the glass fiber layer using a roller, forming a flat, color-coated resin layer that covers the base.
5. Surface Coating: After the intermediate resin has cured, grind the surface thoroughly with a polishing machine and clean it thoroughly.