Glass reinforced plastic corrosion protection, also known as epoxy glass fiber corrosion protection for wastewater tanks, sewage pools, medication pools, and wastewater treatment stations.

Applicable Areas: Inner and outer walls, floors, and ceilings of various tanks and pools in wastewater treatment stations; liquid storage tanks, pressure filter tanks, etc.
Construction Techniques:
1. Wall Treatment: Repair and sandblast the original pool walls using a sanding machine.
2. Base Coating: Apply the mixed resin material evenly to the wall using a roller, ensuring complete penetration and bonding with the wall to form a water-resistant and corrosion-resistant resin base layer.
3. Laying Fabric: Spread the glass fiber flat on the undercoat, then apply a layer of resin on the glass fiber, ensuring it's even, complete, and bubble-free (apply a layer of resin after each spread). After the resin cures, use a sanding machine to remove any raised edges between the fabric layers, making it smooth.
4. Intermediate Coating: After the glass fiber layer is fully cured, remove surface burrs and protrusions. Then, apply the pre-mixed intermediate coating material evenly over the glass fiber layer using a roller to form a flat, color-filling resin layer.
5. Surface Coating: After the intermediate resin has cured, use a polishing machine for a thorough grind and clean thoroughly.