JCP600F-LLuggage packing machine
u Technical Specifications:
¶ Turntable Diameter 500mm
¶ Overall Height: 1750mm
¶ Turntable Load Capacity: 100kg
¶ Overall Weight: 240 kg
¶ Total Power Output0.75kw
¶ Power Voltage: 220V
¶ Rpm Range: 0~36RPM (Variable Frequency Drive available)
¶ Applicable Film: 15~35 pre-stretched shrink wrap film (25μ recommended)
¶ Machine Dimensions: 1650*600*1800mm（L*W*H）
¶ Maximum luggage size: 800mm x 450mm x 1000mm (L x W x H)
¶ Maximum packaging weight: 100 kg
u Key Performance Traits
Control System
¶ PLCProgrammable control; variable winding layers and counts
¶ Photoelectric switch, automatic sensing of cargo height
¶ Fully automatic operation available, with manual override (can be set on the control panel), allowing for wrapping irregular luggage manually.
¶ Number of wraps, film tension can be controlled on the panel .
¶ The "Top Time Setting" feature ensures safe film change, quick and convenient, and allows for either single upward or single downward movement.
¶ Special rubber guiding rods, minimize damage to wrapping film, ensuring smooth, even film output.
¶ Adjustable speed for rising, falling, and film feeding.
Film System
¶ Film Frame Power Pre-stretching Mechanism, Pre-stretching up to200%。
¶ The membrane frame features electronic constant tension control, allowing adjustable speeds for both rising and descending, as well as adjustable film feeding speed.
¶ Chain control, smooth and reliable, gradual start and stop .
¶ Top and bottom winding counts can be adjusted separately.
¶ The film frame can easily adjust its up and down position to accommodate taller luggage (over 500mm).
¶ Film system actuator, one pull and go
¶ DC Speed Control System for Film Tension Control
Memory Function
The machine's display screen shows the number of packages completed.
Pillar section
¶ Single chain drive, smooth and reliable
¶ Maximum packaging height available for customization
Qualification Certification
¶ Mechanical conformsCEStandardized and certified by authorized bodies
Primary electrical configuration
¶ PLC Programmable Logic Controller
¶ Text ScreenYonghong
¶ Relay Omron
¶ Variable Frequency Drives (2 units) - Yung Hua
¶ NEMA Close Limit Switch - Omron
¶ Motorized Lift Platform for Film Frame
¶ Send Film Motor - Boshan
¶ Silicon Controlled Rectifier (SCR)FOTEK
¶ Photoelectric switchPanasonic
u Mechanical Components
The frame is made of stainless steel, and the columns are...1.5mm Made of steel with baked paint.
u Installation:
Equipment installation location should be on level ground.
No other equipment is permitted above the installation location of the equipment.
The equipment must have a separate power supply; it is strictly prohibited to share power with other equipment.
