The MS type auger conveyor is designed in strict accordance with national industry standards, featuring standardization, systematicness, and a wide range of applications.
·Transports materials with high bulk density, strong abrasiveness, and poor fluidity. Allows for multi-point feeding and unloading, flexible process layout, fully enclosed conveying, and environmental protection.
· MS Type BurialScraperConveyor BeltAvailable measures include using flat scraper blades, extending the head and middle discharge ports, adding a discharge impact device, and increasing the radius of the curved section arc to eliminate head, tail, curved section, accumulation, and blockage phenomena, or choosing a dedicated series scraper conveyer. The MS type embedded scraper conveyer is suitable for:
The MS type buried scraper conveyors are widely used for materials with a bulk density of ≤1.2 t/m³, temperature below 100°C, and moisture content that allows the material to form a small ball when squeezed in hand and easily falls apart, with minimal stickiness. Such materials include coal slag, ash, grains, cement, and other powdery, small-grained, and small-piece materials.
·This MS-type troughed scraper conveyor is not suitable for conveying the following materials: materials with high bulk density (>1.2 t/m³) that are abrasive and highly adhesive; materials that are fragile and have a tendency to break in the process; corrosive materials; materials with good fluidity; materials at high temperatures or those that are flammable or explosive.