The MS type auger conveyor is designed strictly in accordance with national industry standards, being standardized, systematic, and with a wide range of applications.
· Handles materials with high bulk density, strong abrasiveness, and poor fluidity by allowing multi-point feeding and unloading, offering flexible process layout, fully enclosed conveying, and ensuring environmental pollution-free operation.
· MS type burialScraperConveyor BeltAvailable measures include using flat scraper blades, extending the head and middle discharge ports, adding a discharge impact device, and increasing the radius of the curved section arc to eliminate phenomena such as head, tail, curved section, material accumulation, and blockages, or choose a dedicated series scraper conveyer. The MS type buried scraper conveyer is applicable to:
The MS type buried scraper conveyor is widely used for materials with a bulk density of ≤1.2t/m³, temperature below 100°C, and moisture content that allows the material to form a ball when pinched by hand, but still breaks apart easily, with low粘性. Examples include: coal fines, ash, grains, cement, and other similar materials.
·This MS type scraper conveyor is not suitable for transporting the following materials: materials with high bulk density (> 1.2t/m3) that are abrasive and have strong adhesion; materials that are easily damaged and not allowed in the process; corrosive materials; materials with good fluidity; materials at high temperatures or those that are flammable or explosive.