Three-way分流器 Electro-hydraulic three-way butterfly valve DEZ-Electro-hydraulic hooded gate
1. The three-way分流器 is suitable for various bulk materials such as ores, coal, coke, slag, and chemical products with a bulk density of ≤2.5t/m3. When used in corrosive or high-temperature conditions, the material of the gate can be replaced. In explosion-proof areas, the XDGB type electro-hydraulic push rod or DYQB type explosion-proof electro-hydraulic rotary drive can be used.
2. The A & B type Tee Diverters can directly connect the top flange to the bottom of the hopper on the conveyor head or to the feeding interface of other equipment. The C, D, and E type Tee Diverters are connected in the same manner, but they are generally used under conditions of a heap density ≤ 2.8t/m3, with high abrasiveness and harsh working environments. Their structure and dimensions are larger (the liner is also thicker), resulting in a heavier weight. Additional support is required when in use. The A, B, C, D, and E type Tee Diverters can all achieve bidirectional material switching and分流.
Electro-hydraulic three-way分流阀 product features
Well-designed, with complete specifications and models, product series are available for easy selection. High in versatility and comprehensive compatibility, the operation is simple, and maintenance is straightforward.
2. If all gates are powered by electro-hydraulic rotary actuators or electro-hydraulic cylinders, they offer rapid and flexible operation, along with load-bearing start-up capability and overload protection. This prevents motor burnout, ensuring smooth and reliable equipment operation. The entire unit is compact, lightweight, energy-efficient, low-noise, and easy to install.
3. Full-liquid power transmission, with both thrust and pull force capable of infinite adjustment, offering a wide driving force range. Adjustable reciprocating stroke with automatic locking, controlling gate flow by adjusting the gate opening degree.
4. Low investment. Due to the standardized design and mass production of all gate models, costs are reduced. Additionally, individual gates can be equipped with one or several electro-hydraulic rotary drives or electro-hydraulic push rods, enabling full hydraulic transmission. No dedicated hydraulic station is needed, and there are no auxiliary equipment.
5. Wide Application Range. Considering the gate may operate in various environments, the design has maximized the variety of gate models, specifications, types, and series to ensure comprehensive compatibility. This allows for widespread application in the storage and transportation of bulk materials across various industries.
6. The distributed material gate is equipped with an electrically powered rotating drive or an electric hydraulic actuator, which can achieve stroke control and signal display; centralized control without stroke and digital display; or 4-20mA microcomputer control for application scope.
