Boiler Pipe Cleaner, Drain Cleaner, Boiler Cleaning Machine

    Boiler in use  After the period, condensation forms multiple layers of soot and scale inside the chimney pipes and water pipes, significantly reducing the efficiency of the boiler.“Thermal effect”And it accelerates the reduction of the boiler's lifespan. Failure to regularly clean the pipes increases the likelihood of boiler damage.。

    This series of cleaning machines is designed for cleaning the inner tubes of boiler chimneys.“Tobacco residue”Pipe interior“Lime Scale”Available   Features, suitable for use on the device0.5T-30TBoiler usage. Regular cleaning and maintenance of boiler pipes with this product can enhance“Thermal effect”Energy-saving30%Reduce labor intensity, (and also smoothly unblock pipes that have already been installed). Its effectiveness is superior to chemical cleaning, and it ensures long-term boiler operation.  And economic operation, is currently domestic  Ideal mechanical cleaning  Charter flight.

   　 GQ-580Boiler Tube Cleaning Machine (Boiler Tube Flush Machine)Corn dryer, washing and drying heat exchanger tubes used in national grain reserve warehouses“Dust”And“Tar residue”Easy and quick to clean. (Two)Instructions,Cautionary Notes

  1.The hose must be released when connecting to the main unit.,Straighten,The square steel at the hose end aligns with the main unit's square hole and is inserted..Then, set down the Yuanshao handle.,Once connected,The other end of the hose is fitted with the required cutting head..

   2.As pipe bending,Smaller diameter, complex furnace tube,Remove the universal joint when in use.,Replace with additional flexible shaft,Universal Joint Header Replacement.Insert the blade tip into the tube first during operation.,Restart the motor,Insert the阮管 in sequence,Rinse with water,Pull the blade out after completion.Replace with wire brush disc,Polish the tube wall.

   3.Use, Personal guard for switch control,Motor activation,Fingers Place on the red button(Pause),If the hose is found to be violently jumping or jamming during cleaning,Shut off the switch promptly.,Pull the hose out a bit.,Re-start the motor,Further propel,Repetitive action,Until a smooth passage is achieved.

    4.Additional flexible shaft applications for cleaning curved surfaces,Small-radius furnace tube,Do not force it in; move back and forth during cleaning.,To prevent damage to the joint shaft,Hose Assembly,Furthermore, it is necessary to rinse while washing and add water for flushing.,Avoid dry cleaning

 5.Direction of rotation as indicated by the arrow,No reversal allowed.After each use,In the hose,Coat the flexible shaft with anti-rust oil.,Bearings with lubricant.

  6.Operators during usage,Should consider the bore diameter and the accumulated soot,Scale thickness,Select Blade,Start small, scale up,As the aperture is sturdy,Choose the high-speed steel pointed drill bit supplied with the machine.,If scaling is too hard,Not passing yet,We offer custom-made alloy steel drill bits.,As per customer's request,Additional designs are available.,Custom knives