DYTP-1000-500 Rod Valve Matching Electric Actuator, Straight Electrohydraulic Push Rod

Electro-hydraulic actuator, also known as an electric hydraulic push rod, suitable for reciprocating linear (or reciprocating rotational) movement.  (Angle) movement, suitable for lifting, lowering, or clamping workpieces, also applicable in long-distance and high-altitude hazardous areas, and can be connected to computers for centralized (programmed) control. Now widely used in metallurgy, mining, and other industries. Electricity, machinery, grain, cement, chemicals, water conservancy, transportation, and other sectors are essential general power sources. Working principle:

Electro-hydraulic push rods are powered by an electric motor. By rotating the motor in either direction, hydraulic oil is pressurized through a bidirectional gear pump and delivered through an integrated oil circuit to the working cylinder, thereby achieving reciprocating motion of the piston rod. Advantages:

1..Overload Automatic Protection Feature: During the operation of the electro-hydraulic push rod, if the external force on the piston rod exceeds the rated output force or the piston reaches the end position, the motor continues to rotate. At this point, the oil pressure in the oil circuit increases to the set pressure, and the overflow valve quickly and accurately overflows, achieving overload automatic protection. Although the motor is rotating,    It will burn.2.Self-locking Function: The oil circuit module of the electro-hydraulic push rod is designed with a pressure self-locking mechanism. Once the motor stops rotating, the piston rod immediately remains stationary.  At the location, the pressure oil is in a pressure-holding state.3.Continuous Adjustment: Can be adjusted continuously according to customer requirements within the specified speed, output force, and stroke range.

 Model Description The hydraulic push rod primarily consists of six basic elements: the push rod's type, the motor's protection grade, rated output force, stroke, rated speed, and usage angle. It can also be customized according to customer requirements.   Requirements: Three adjustable functions, namely: speed adjustment push/pull, force adjustment, and stroke adjustment (stroke switch positioning). In addition to the aforementioned three adjustable functions, when ordering:   Please note the text outside, and fill in the six key elements carefully, referring to the model coding method for the rest. DYTFTypeSplit-typeElectro-hydraulic Push Rod Technical Specifications (Selection Chart)

Installation and Usage Precautions

1. Electro-hydraulic push rod installation requires sufficient space; ambient temperature10-60Within a range of degrees (special order required for high-temperature environments).

2. Users can configure the journey switches according to their control needs.

3. Before installation, the electric hydraulic push rod should be placed flat on the ground and hydraulic oil (brand number) should be injected.HM.Accuracy Grade46-68The oil level is below the sight glass, and the separate push rod oil surface should be at a distance from the box.50mmWithin.

4. DYTZ、DYTP、DYTFLoosen the exhaust screw of the exhaust port before use.2Circle.

5. Trial power-on is required during installation.

a. Overall push rod, simply plug in the power and it's ready to operate.

b. Detachable push rod; connect power supply to allow the hydraulic cylinder to reciprocate several times under no load, expelling air from the cylinder and oil lines, then apply load.

Hydraulic Push Rod Maintenance

1. To ensure the service life of the high-pressure oil hose, it must be securely fastened with rubber.