Automatic Belt Centering Device, Anti-Drift Device, Integrated Hydraulic Centering Device

Belt misalignment is a common phenomenon in belt conveyor operation. Misalignment of the upper belt can easily cause material spillage, while severe misalignment can lead to belt tearing; misalignment of the lower belt is prone to damage the belt mill frame. Correcting belt misalignment is a major challenge in belt conveyor operation. This device can effectively and reliably correct belt misalignment caused by various factors such as improper installation, poor operation, unsmooth material impact force direction, varying load size, and uneven internal cross-sectional tension of the belt.

Belt Automatic Deviation Correction Device Performance Features:

One belt automatic alignment device, reliability  ：

All components of the belt automatic alignment device system have low working load and short working hours, making our products highly durable.

Two, highly responsive and efficient in correction:

The belt automatic alignment device will immediately activate as soon as the belt drifts and touches the drive wheel, causing the centering idler to rotate.  Angle, the belt is quickly corrected.

Three: Features a crucial centering roller positioning function:

The automatic alignment roller of the belt automatic alignment device exerts an alignment force on the belt after rotation, while the belt simultaneously exerts a reactive force on the alignment roller, causing it to reverse and reset. If the alignment roller is not braked, the alignment force will disappear as the roller resets. The logic valve group's braking positioning function allows the alignment roller to be positioned at a specific angle, where the alignment force balances the run-off force, and the belt runs at the center line position.

Evaluate a bias corrector during inspection.   Be mindful of whether the correcting machine has this feature. Although it seems simple, this feature significantly impacts the stable operation and correction quality of the belt aligning machine.

Four: Suitable for explosion-proof, dusty, humid, and high-temperature environments.

The belt automatic alignment device operates without electricity and does not use electrical control components, thus, it can be used in underground mines and other hazardous environments where flammable and explosive substances are present.