Deslagging valve with push rodDYTP-700-400/110  Electro-hydraulic push rodParallel hydraulic push rod 

Electro-hydraulic push rods are powered by an electric motor, which rotates in both directions to output pressurized hydraulic oil through a bidirectional gear pump. The oil then flows through an integrated oil circuit block to the working cylinder, achieving reciprocating motion of the piston rod. Advantages:

1..Overload Auto-Protection Feature: During the operation of the electro-hydraulic actuator, if the external force on the piston rod exceeds the rated output force or the piston reaches its end position, the motor continues to rotate. At this point, the oil pressure in the circuit increases to the set pressure, and the overflow valve quickly and accurately overflows, thus achieving overload auto-protection. Although the motor is rotating,    Will burn.2.Self-locking Function: The hydraulic push rod's oil path integrated block is designed with a pressure self-locking mechanism. Once the motor stops rotating, the piston rod immediately remains stationary.  At this position, the pressure oil is in a pressure-holding state.3.Continuous Adjustment: Can be infinitely adjusted within the specified speed, output force, and stroke range according to customer requirements.

 Model Description The electro-hydraulic push rod is primarily composed of six basic elements: the type of push rod, the protection grade of the motor, the rated output force, the stroke, the rated speed, and the usage angle. It can also be customized according to customer requirements.   Requirements: come with three adjustment functions, namely: speed adjustment push/pull, force adjustment, and stroke adjustment (stroke switch positioning). In addition to the aforementioned three adjustment functions, when placing an order:   Please note the text, and fill in the six key elements carefully, referring to the model coding method for the rest. DYTZType Parallel Hydraulic Push Rod Technical Parameters (Selection Chart)

Model Rated Output Power （10NRated Speed （mm/sMotor Model, Stroke Manufacturing Range （mmTravel itinerary manufacturing range （mm）

Thrust Tensile strength Boost speed Lapping speed

DYTZ450-/110 450 310 110 140 Y802-4-0.75KW 50-800 10-110

DYTZ700-/110 700 510 110 140 Y90S-4-1.1KW 50-1500 10-110

DYTZ1000-/110 1000 750 110 140 Y90L-4-1.5KW 50-1500 10-110

DYTZ1750-/90 1750 1300 90 115 Y100L1-4-2.2KW 50-2000 10-90

DYTZ2500-/90 2500 2050 90 115 Y100L2-4-3KW 50-2000 10-90

DYTZ3000-/90 3000 2500 90 115 Y100L2-4-3KW 50-2000 10-90

DYTZ4000-/80 4000 2950 80 100 Y112M-4-4KW 50-2000 10-80

DYTZ5000-/60 5000 3300 60 90 Y112M-4-4KW 50-2000 10-60

DYTZ6000-/60 6000 3800 60 90 Y132S-4-5.5KW 50-2500 5-60

DYTZ7000-/50 7000 4500 50 75 Y132S-4-5.5KW 50-2500 5-50

DYTZ8000-/50 8000 5000 50 80 Y132M-4-7.5KW 50-2500 5-50

DYTZ10000-/40 10000 6500 40 60 Y132M-4-7.5KW 50-2500 5-40

DYTZ15000-/35 15000 11000 35 45 Y132M-4-7.5KW 50-2500 5-35

DYTZ20000-/25 20000 15000 25 35 Y132M-4-7.5KW 50-2500 5-25

Note:1The voltage ratings for the motors listed above are:380VIP ratingIP44，     Origin GradeBGrade 2For any journey manufacturing scope or speed manufacturing range exceeding the table, please specify otherwise, it will be manufactured according to the technical parameters listed in the table. 3The speed range in the table is for horizontal use only; speeds when used upwards or downwards are half of the horizontal speed. 4The typical model numbers and power ratings listed in the table indicate that this model push rod operates at the rated output force and speed.   Power at high values. Motor power is proportional to the push rod force and speed.