Electro-hydraulic three-way分流器, three-way directional valve, coal bin three-way chute

1、 Fill in the structural form code, F split-type, ZIntegratedJIntegratedKFMineral industry split type,KZMineral mining complete setsKJMining integrated

2. YTZQ denotes the equipment name code, representing Passive Hydraulic Alignment Device, also known as Aligner, Runout Corrector, Bias Corrector, Centering Device, etc.

3. Specifications, i.e., bandwidth (500, 650)、800、1000、1200、1400、1600、1800、2000、2200）；

4、Second-hand        An□ Fill in the installation location code, S indicates installation on the upper level, XIndicating installation on the lower level ；

5. Third □ fill   Function Code, No indicates one-way conveyance by belt machine.N indicates that the belt conveyor is reversible for transportation, meaning bidirectional transport.

6. User Instructions: When placing an order, the user must provide a cross-sectional drawing of the belt conveyor (i.e., the dimensions of the middle frame roller assembly) or specify the belt conveyor model and roller specifications (e.g., TD75).TypeDT II, ULarge incline angle belt conveyors, hook-type belt conveyors; roller diameter133mm, Length465mm,Axle head mounting slot width18mm), if parameters are not available, our company can send pre-sales service personnel to the site for measurements.

Section 3: Performance Comparison of Different Structural Hydraulic Adjusters

1. Features of F-type split structure: easy transportation of components, on-site assembly, convenient transport, and low labor intensity for installation, but longer installation time.

2. Z-shaped integral structure features: easy to assemble into a complete machine, quick installation, and can be quickly disassembled into components for convenient transport through narrow passages, then reassembled on-site.

3. J-shaped integrated structure features: highly integrated, more responsive, reliable performance, easy installation, with shorter installation time, and can be quickly disassembled into components for convenient transport through narrow alleys, then rapidly reassembled on-site.

4. Three structural features of the mining series: Based on the original structure, enhanced protection and corrosion resistance for operation in harsh environments, optimized hydraulic principles for increased reliability, and extended lifespan by 2 to 3 years.Extremely durable with double the service life.

Four, distribution parameters of hydraulic aligners on the belt conveyor

The fully automatic hydraulic aligner is available in two installation positions: upper and lower. Under normal circumstances, the belt conveyor transports materials on the upper level and returns them on the lower level. The upper belt is more prone to deviation due to the impact of materials and changes in conveying volume, often more severe than the lower belt. The number of upper hydraulic aligners installed is typically greater than that of the lower level.1.5 times; For the split-type upper hydraulic aligner, the recommended installation spacing is 15~30 meters, and for the split-type lower hydraulic aligner, it is 20~40 meters; for the integrated upper hydraulic aligner, the recommended installation spacing is 20~40 meters, and for the integrated lower hydraulic aligner, it is 30~60 meters.