Japan Magnescale Displacement Sensor DK25PLR5
Products range that can be measured up to 205mm
High rigidity, sturdy structure, excellent environmental resistance, supports a wide range of measurements
Measurement Range: 10mm, 25mm, 50mm, 100mm, 155mm, 205mm
Resolution: 0.5 μm
Accuracy: 2μm p-p to 6μm p-p (varies by model)
Dustproof, drip-proof, and oil-resistant structure. Good environmental resistance (Type P).
High Measuring Force (DK10/25/50/100P Type): 4.9 ~ 9.3 N (varies by model)
Low measuring force (DK10/25/50/100N models): 0.3 ~ 2.7 N (varies by model)
With the magnetic吸附式 probe provided, it can be attached to the moving platform for measurement (DK155 / 205).
Built-in origin
Output Signal: A/B phase (pulsed), origin (differential line driver signal with output voltage)
| Main Specifications | |||||
|---|---|---|---|---|---|
※1 Resolution settings are required when connecting to LT30 series, MG series, and LY70 series. Please refer to the respective user manuals for details. Changes to the recorded content will not be announced separately. | |||||
| Model | DK25NR5 | DK25PR5 | DK25NLR5 | DK25PLR5 | |
| Output | Output A/B/Z phase voltage differential line driver signals (compliant with EIA-422) | ||||
| Resolution ※1 | 0.5μm | ||||
| Measurement Range | 25mm | ||||
| Accuracy (at 20°C) | 2μm p-p | ||||
| Measuring Force (at 20℃) | Upward | 0.4 ±0.3 N | 4.9N or less | 0.4 ±0.3 N | 4.9N or less |
| Horizontal | 0.7 ±0.35 N | 4.9N or less | 0.7 ±0.35 N | 4.9N or less | |
| Downward | 1 ±0.4 N | 4.9N or less | 1 ±0.4 N | 4.9N or less | |
| Origin | 1 position (at a location of 1mm ±0.5mm from the main shaft) | ||||
| Response Speed | 250m/min | ||||
| Vibration-resistant | 150m/s2 (10 ～ 2000Hz) | ||||
| Impact-resistant | 1500m/s2 (11ms) | ||||
| Ingress Protection (IP) rating | IP50 | IP64 | IP50 | IP64 | |
| Operating Temperature Range | 0 ～ 50°C | ||||
| Storage Temperature Range | −20 ～ 60°C | ||||
| Power Voltage | DC +5V ±5% | ||||
| Power Consumption | 1,000 or less | ||||
| Output Cable Length | Approximately 2.5 meters | ||||
| Central control pipe diameter | φ20 0‒0.013 mm | ||||
| Quality ※2 | Approximately 300g | ||||
| Measurement Head | Super-hard spherical DZ-122 (mounted with M2.5 screws) | ||||
| Accessories | Instruction Manual, +PM4 x 5 screws (2 pcs) | ||||
