Japan Magnescale Displacement Sensor DK25NLR5
Product lineup with measurements up to 205mm
High rigidity, robust structure, excellent environmental resistance, supports a variety of measurements
Measurement Range: 10mm, 25mm, 50mm, 100mm, 155mm, 205mm
Resolution: 0.5 μm
Accuracy: 2μm p-p to 6μm p-p (varies by model)
Dustproof, drip-proof, and oil-resistant structure. Good environmental resistance (Type P).
High Measuring Force (DK10 / 25 / 50 / 100P Models): 4.9 to 9.3 N (varies by model)
Low measurement force (DK10/25/50/100N models): 0.3 ~ 2.7 N (varies by model)
With the included magnetic吸附式 probe, it can be attached to the moving platform for measurement (DK155 / 205)
Built-in origin
Output Signal: A/B phase (pulsed), home position (differential line driver signal with output voltage difference)
| Main Specifications | |||||
|---|---|---|---|---|---|
※1 Resolution needs to be set when connecting to LT30 series, MG series, and LY70 series. For details, please refer to the respective user manuals. Changes to the recorded content will not be announced separately. | |||||
| Model | DK25NR5 | DK25PR5 | DK25NLR5 | DK25PLR5 | |
| Output | Output A/B/Z phase voltage differential line driver signals (compliant with EIA-422) | ||||
| Resolution※1 | 0.5μm | ||||
| Measurement Range | 25mm | ||||
| Accuracy (at 20°C) | 2μm p-p | ||||
| Measurement Force (at 20℃) | Upward | 0.4 ±0.3 N | 4.9N or less | 0.4 ±0.3 N | 4.9N or less |
| Lateral | 0.7 ±0.35 N | 4.9N or less | 0.7 ±0.35 N | 4.9N or less | |
| Downward | 1 ±0.4 N | 4.9N or less | 1 ±0.4 N | 4.9N or less | |
| Origin | 1. (At a position 1mm ±0.5mm from the main shaft movement) | ||||
| Responsive speed | 250m/min | ||||
| Vibration-resistant | 150m/s2 (10 ～ 2000Hz) | ||||
| Impact-resistant | 1500m/s2 (11ms) | ||||
| Ingress Protection (IP) rating | IP50 | IP64 | IP50 | IP64 | |
| Operating Temperature Range | 0 ～ 50°C | ||||
| Storage temperature range | −20 ～ 60°C | ||||
| Power Voltage | DC +5V ±5% | ||||
| Power Consumption | 1,000 or less | ||||
| Output Cable Length | Approximately 2.5 meters | ||||
| Central control pipe diameter | φ20 0‒0.013 mm | ||||
| Quality ※2 | Approximately 300g | ||||
| Probe | High-hardness spherical DZ-122 (mounted with M2.5 screws) | ||||
| Accessories | Instruction Manual, + PM4 x 5 screws (2 pieces) | ||||
