Product Introduction

The JLM.JLK series of wood-specific hot air (steam) drying equipment can dry wood of various species, sizes, and purposes, featuring high efficiency and energy saving, safety and reliability, short cycles, high quality, and low cost. It is widely used in various wood processing enterprises, especially suitable for wood product export companies. During normal operation, the fuel is fully combusted in the combustion chamber, producing high-temperature air through the heat exchange system. Under the action of the circulating fan, the high-temperature airflow is delivered through the control piping system to the drying chamber for wood drying. Simultaneously, the steam generation system produces a large amount of atmospheric steam, which, according to the drying process requirements, is sent into the drying chamber through the control piping system to perform steam injection and moisture adjustment on the wood. The saturated steam can make the moisture content inside and outside the wood consistent in a short time, thereby releasing the residual stresses in the wood. Additionally, for solid and thick wood, our company's pressure intermittent heating drying process can be used, which solves the defects such as internal cracking, end cracking, and deformation that occur during the drying process, maximizing the yield of finished wood products. Furthermore, it is equipped with a secondary heat utilization system, which maximizes the reduction of heat energy loss caused by moisture exhaust, significantly lowering the drying cost and shortening the drying cycle. When the wood moisture content is below 15%, all insects and eggs harbored within the wood can be completely killed after 6-8 hours of high-temperature dry steam treatment.

Control Systems and Features:
The JLM.JLK series drying equipment is equipped with adjustable combustion aid in the combustion chamber, a tunable control device at the beginning of the chimney, a tunable steam injection device at the start of the air duct, and comes with an automatic temperature display meter and a humidity sensor. With these configurations, operators can control and monitor the temperature and humidity inside the drying chamber according to the drying process requirements, ensuring maximum drying of wood.
The control system can be fully automatic or manually controlled. In large drying rooms, top-mounted and side-mounted circulation fans can be added according to customer requirements to further enhance the flow of indoor hot air.
Dual-fuel drying equipment features:
Multi-band automatic temperature control, high-temperature alarm, humidification, dehumidification, timed on/off, suitable for secondary drying of wood, balancing the moisture content of wood.
2. Fast warming, even heat distribution, and low energy loss; can be assembled and disassembled, easy to move; suitable for rental facilities and wood processing enterprises.
3. Dual-fuel capable, utilizing low-voltage electricity at night for cost-effectiveness; burning wood during the day for even lower prices – a win-win situation.