Product Introduction

The JLM.JLK series of wood-specific hot air (steam) drying equipment can dry wood of various species, sizes, and purposes. It boasts high efficiency, energy saving, safety, reliability, short cycles, high quality, and low costs. Widely used in wood processing enterprises, it is particularly suitable for wood product export companies. During normal operation, the fuel is fully combusted in the combustion chamber, generating high-temperature air through the heat exchange system. Under the action of the circulating fan, this high-temperature air is channeled through the control pipeline system to the drying room for wood drying. Simultaneously, the steam generation system produces a large amount of atmospheric steam, which is sent into the drying room through the control pipeline system according to the drying process requirements for steam-injection humidification treatment of the wood. The saturated steam can make the moisture content inside and outside the wood consistent in a short time, thereby releasing the residual stress in the wood. Additionally, for solid and thick wood, our company's pressure intermittent heating drying process can be used, which solves the defects such as internal cracking, end cracking, and deformation that occur during the drying process, significantly improving the yield of finished wood products. It also features a heat energy secondary utilization system, which maximizes the reduction of heat energy loss caused by moisture discharge, significantly lowering drying costs and shortening the drying cycle. When the moisture content of the wood is below 15%, all insects and eggs residing within the wood can be completely killed after 6-8 hours of high-temperature dry steam treatment.

Control Systems and Features:
The JLM.JLK series drying equipment features adjustable combustion aids within the combustion chamber, adjustable control devices at the beginning of the chimney, adjustable steam jet devices at the beginning of the air duct, and is equipped with an automatic temperature display instrument and a humidity sensor. With these configurations, operators can control and monitor the temperature and humidity inside the drying chamber according to the drying process requirements, achieving maximum wood drying.
The control system can be fully automated or manually controlled. In large ovens, top-mounted and side-mounted circulating fans can be added according to user requirements to further enhance the flow of indoor hot air.
Dual Fuel (Wood/Electric) Drying Equipment Features:
Multi-band automatic temperature control, high-temperature alarm, humidification, dehumidification, timer on/off, suitable for secondary drying of wood, balancing wood moisture content.
2. Fast temperature rise, even heat distribution, low heat loss; can be assembled and disassembled easily, mobile for convenience. Suitable for leasehold factories and wood processing enterprises.
3. Dual-fuel option with electricity and wood. Utilize low-voltage power at night for cost-effectiveness; burn wood during the day for lower prices. A win-win situation.