Product Introduction:

The JLM.JLK series of wood-specific hot air (steam) drying equipment can dry wood of various species, sizes, and purposes, featuring high efficiency, energy-saving, safety, reliability, short cycles, high quality, and low costs. It is widely used in wood processing enterprises, particularly suitable for wood product export companies. During normal operation, the fuel burns completely in the combustion chamber, generating high-temperature air through the heat exchange system. Under the action of the circulating fan, the high-temperature airflow is transported through the controlled pipeline system to the drying room for drying the wood. Simultaneously, the steam generation system produces a large amount of atmospheric steam, which is sent into the drying room through the control pipeline system according to the drying process requirements for steam-injection humidification treatment of the wood. Saturated steam can quickly equalize the moisture content inside and outside the wood, thereby relieving the residual stress in the wood. Additionally, for solid and thick wood, our unique pressure intermittent heating drying process can be used, which completely solves internal cracks, end cracks, and deformation defects that may occur during the drying process, greatly improving the yield of finished wood products. Moreover, it is equipped with a secondary heat utilization system, which maximizes the reduction of heat loss caused by moisture removal, significantly lowering drying costs and shortening the drying cycle. After 6-8 hours of high-temperature dry steam treatment when the wood moisture content is below 15%, all wood-boring insects and eggs can be completely killed.

Control Systems and Features:

JLM.JLK series drying equipment is equipped with adjustable combustion assist devices in the combustion chamber, adjustable control devices at the start of the chimney, adjustable steam injection devices at the start of the air duct, and comes with an automatic temperature display meter and a humidity sensor. With these configurations, operators can control and monitor the temperature and humidity inside the drying chamber according to the drying process requirements, maximizing the drying of wood. The control system can be fully automated or manually controlled. In large drying rooms, top-mounted and side-mounted circulating fans can be installed according to customer requirements to further enhance the flow of hot air inside the room.