Product Description

The JLM.JLK series of wood-specific hot air (steam) drying equipment can dry wood of various species, sizes, and purposes, featuring high efficiency and energy saving, safety and reliability, short cycles, high quality, and low costs. It is widely used in wood processing enterprises, especially suitable for wood product export companies. During normal operation, the fuel is fully combusted in the combustion chamber, generating high-temperature air by the heat exchange system. Under the action of the circulating fan, the high-temperature airflow is transported through the control pipeline system to the drying room for drying the wood. Simultaneously, the steam generation system produces a large amount of atmospheric steam, which, according to the drying process requirements, is sent into the drying room through the control pipeline system for spray steaming and humidification treatment of the wood. The saturated steam can make the moisture content inside and outside the wood consistent in a short time, thus relieving the residual stress of the wood. Moreover, for solid and thick wood, our company's pressure intermittent heating drying process can be used, which solves the defects such as internal cracking, end cracking, and deformation during the drying process, greatly improving the yield of finished wood products. Furthermore, it is equipped with a secondary utilization system for heat energy, which maximizes the reduction of heat energy loss caused by moisture discharge, significantly lowering drying costs and shortening the drying cycle. When the moisture content of the wood is below 15%, all insects and eggs inside the wood can be completely killed after 6-8 hours of high-temperature dry steam.
Control Systems and Features:
The JLM.JLK series drying equipment is equipped with adjustable combustion aids in the combustion chamber, adjustable control devices at the beginning of the chimney, adjustable steam jet devices at the beginning of the air duct, and comes with an automatic temperature display instrument and a humidity sensor. With these configurations, operators can control and monitor the temperature and humidity inside the drying chamber according to the drying process requirements, achieving maximum wood drying.
The control system can be fully automatic or manually controlled. In large ovens, top-mounted and side-mounted circulating fans can be added according to customer requirements to further enhance the flow of indoor hot air.

Equipment Features：
1. Even heat distribution, rapid speed. 2. Easy to operate, ready to use instantly, no thermal inertia. 3. Continuous production, conducive to automatic control. 4. Selective heating, high moisture content, high heat output. 5. Extracts, insecticidal, and sterilization effects. 6. Short drying cycle. 7. Energy-saving, resource-saving, green and environmentally friendly, thermal efficiency 85%. 8. High drying quality, wood utilization rate increased by 85%.
2. Application Scope:
Applicable to tea processing, food industry, wood industry, rubber industry, pest and sterilization, desulfurization, medical, ceramic sintering, and chemical industry plasma technology.

JLW Microwave Electric Energy Drying Oven Technical Specifications