The main advantages of the cyclone dust collector are as follows:
(1) The cyclone dust collector has no moving parts inside, making maintenance easy.
(2) Easy to produce and manage.
(3) Compact in size, simple in structure, and cost-effective when handling the same airflow volume.
(4) When used as a pre-dust collector, it can be installed vertically for easy use.
(5) Designed for easy parallel operation with multiple units, efficiency and resistance are unaffected when handling high air volumes.
(6) Withstanding temperatures up to 600°C, and with special high-temperature materials, even higher temperatures can be tolerated.
(7) After installing wear-resistant inner lining, the dust collector can be used to purify flue gas containing highly erosive dust.
(8) Dry ashing is available, facilitating the recovery of valuable dust.
Baghouse Dust Collector Introduction
High-efficiency dust removal, with the dust concentration at the dust collector outlet being within tens of mg/m3, and a high separation efficiency for fine dust with sub-micron particle sizes.
(2) Wide range of air volume handling, from as little as a few cubic meters per minute to tens of thousands per minute, suitable for industrial furnace flue gas dust removal and reduction of atmospheric pollutant emissions.
(3) Simple structure, easy maintenance and operation.
(4) Materials like glass fiber and P84, which are heat-resistant, can operate under high temperatures above 200°C.
(5) Unaffected by dust characteristics and resistive influences.
Bag Filter Technical Parameters
1. Airflow Handling: 11,520-21,600 m³/h
2. Filter Airflow: 0.8-1.5/min
3. Filtration Area: 240 m²
4. Pulsation Valve: 20 units
5. Dust Collector Resistance: ≤1200Pa
6. Pressure Resistance: 5000 Pa
7. Blowing Pressure: 0.5-0.7 Pa
8. Gas Consumption: 0.9 m³/min
9. Dust Removal Frame: 120*2450mm/240 pcs (Carbon Steel, Powder Coated)
10. Dust collector bags; 133*2500mm/240 pcs (room temperature, medium temperature, high temperature needle felt)
11. Control cabinet: 1 unit
12. Screws, sealing strips; 1 set
13: Deslagging Valve, 2 units (200*200) Gravity Flip Disc Valve
Our company specializes in manufacturing a variety of dust collectors, including bag dust collectors, bag-type dust collectors, 24-bag dust collectors, 36-bag single machine dust collectors, and 48-200 bag dust collectors, all of which are in stock for sale.
