| Origin | Shandong | Specific Gravity | 2.7（g/cm3） | Compressive Strength | 1500（MPa） |
| Bending strength | 1500（MPa） | Application Scope | Roads, flower beds, squares, gardens, schools, etc. | Material | Granite |
| Glossiness | 90 | Brand | Zhuoke Stone | Color | Brown red, red |
| Hardness | Moss 7.4 | Impurities | 0.03% | Specs | 150*200*1000（mm） |
| Is the supply cross-border? | No |
The protective agents used for maintaining the five-pearl curb stones are categorized by material into fluorides, organosilicones, resins, and acrylics, among others. Fluorides and organosilicones, due to their strong breathability, permeability, chemical resistance, and weather resistance, offer comprehensive protection to the five-pearl curb stone, yielding good results. The dryness of the five-pearl curb stone also affects the protective effect. It is recommended to dry the curb stone before applying the protective agent, with a second coat after full drying for enhanced effectiveness.
After the installation of the five lotus curb stones, filling the joints is a requirement for appearance. Filling the joints of the five lotus curb stones reduces pollution between the stone gaps. Both are quite important for the improvement of the quality of the stones. It also allows the installed stone road to achieve a 360-degree aesthetic effect. It lays a certain foundation for future maintenance, reducing unnecessary trouble. How should the installation work of the five lotus curb stones be carried out?
One, after the construction of the Wulianhua curbstone for municipal roads is completed, lay felt on top when performing other constructions to prevent damage to the Wulianhua curbstone.
Two, once the engineering construction is completed, it may be necessary to pay attention to protection.
Three, before or within two working days after the cement slurry dries, no person or vehicle should be allowed on the marble kerbstone paving.
When the Wulianhua curbing stone manufacturers begin protective operations, using the correct and effective methods not only reduces the damage to the Wulianhua curbing stone itself but also enhances the aesthetic appeal of the surface.
The Wulianhua curbstone manufacturer first applies a maintenance agent to the surface twice during maintenance operations, then washes away any surface rust with clean water. The water used is acid-free; the surface of the Wulianhua curbstone is then dried in a specialized workshop. The curbstone is placed in a dedicated workshop for drying to ensure that all moisture is completely removed, with no residual moisture left, as this can lead to rust spots and water stains on the Wulianhua curbstone, causing maintenance failure.
