Small Polishing Machine SpecificationsZJ-100Round Tube Polishing Machine Main Parameters

1.Series: Polishing Machinery
2.Type    Item No:ZJ -100Type
3.Input Voltage:380V/220v
4.Input Power:4.5kw
5.Grinding Wheel Diameter:250/300mm
6.Guide wheel diameter:240mm
7.Grinder speed:2800Please provide the Chinese content to be translated./Minute
8.Guide wheel speed: Variable speed
9.Finished Diameter:1.5--80mm(Customizable) 
10.Processing Length: Unrestricted
11.Processing Efficiency:0-12m/1Minute
12.Cooling System: Pump\Optional
13.Dust Removal System: Fan\Optional

Please provide the Chinese content you would like translated into American English.    Quantity:250kg
15Dimensions:800*900*800(Length, Width, Height  

Custom-designed and manufactured according to the customer's part requirements

Machine tool adjustment and operation

（1Adjustments must be made to the polishing machine for varying diameters of round tubes.
（2Adjust the height of the main tray to ensure the center height of the workpiece aligns with the center height of the guide wheel and the cotton fabric cactus wheel, then securely lock the main tray.
（3Adjustment Method: Place the round tube into the main unit (the main unit should be in a parked state), and then retract the grinder head. Loosen the plate locknut until the center of the round tube is level with the guide wheel, and then secure the plate.
（4Before the first polishing operation, check if all grinding heads have retracted to avoid damaging the machine parts due to excessive cutting-in.
（5The speed of the variable-speed motor driving the导向轮 should increase gradually from low to high to avoid any unexpected malfunctions.
（6Bent round tubes with excessive curvature should be straightened before polishing.
（7To achieve an economically reasonable polishing effect, not only should the polishing cutting amount be chosen reasonably, but also the number of grinding heads involved should be selected based on the original surface condition of the workpiece. For instance, if the surface condition of a round tube is good, the number of grinding heads can be reduced.
（8This machine tool should use quality-certified cotton fabric disc for polishing; otherwise, vibration of the machine tool and other safety hazards may occur due to unbalanced impellers and other reasons.
（9Once the machine tool adjustment and trial throwing are completed, it can operate continuously.

Li Manager: Phone 13780296161