Zhangjiagang Aisiman Intelligent Equipment Co., Ltd.

（1）PVCRaw Material Mixing for Plastic Pipe Extrusion Production Line: It is the process of combiningPVCThickeners, plasticizers, antioxidants, and other auxiliary materials are added to the high-speed mixer in a specific ratio and sequence, followed by mechanical friction between materials, which raises the material temperature to the set process temperature. Subsequently, the cold mixer is used to reduce the temperature of the material.40-50oCThis can then be added to the extruder hopper.

ManufacturingPVCDrain pipe equipment manufacturer, Jiangsu-based pipe material equipment manufacturer

（2）PVCPlastic Pipe Extrusion Production Line Extruder Section: Equipped with a quantitative feeding device, this machine ensures that the extrusion volume matches the feeding volume, guaranteeing stable extrusion of the product. Due to the characteristics of the conical screw, the feeding section has a larger diameter, which increases the heat transfer area and shearing speed of the material, benefiting the plasticization process. The metering section screw has a smaller diameter, reducing the heat transfer area and shearing speed of the melt, allowing extrusion at lower temperatures. As the screw rotates within the barrel, it willPVCThe blended material is plasticized and pushed into the extruder head, achieving compaction, melting, mixing and homogenization; and realizing exhaust and dehydration. The feeding unit and screw drive unit adopt variable frequency speed regulation, enabling synchronous speed adjustment.

Aisman MachineryZhangjiagang manufacturedPP PE PPRPlastic Pipe Equipment Manufacturer