Air-borne vibration dampening pads (impact dampening pads) assist in machine self-vibration, prevent the transmission of vibration forces externally, and ensure precision in machining dimensions. They control the propagation of vibration and noise in building structures. They enable the assembly of rough and fine machining machine tools into production units, eliminating the need for anchor bolts and ground fixation, thereby saving installation costs and shortening the installation cycle. The air-borne vibration dampening pads (impact dampening pads) can be adjusted to change machine positions as needed for production, eliminating secondary installation costs and making it possible to install machines on upper floors and continue normal production. They are suitable for precision machining equipment, three-coordinate measuring machines, marking machines, precision workbenches, Dongyongyuan's high-speed stamping machines, punching machines, forging presses, air compressors, pump bodies, and equipment requiring special vibration isolation (This product description is the property of Dongyongyuan Machinery Co., Ltd., and may not be reproduced without permission!). The use of air-borne vibration dampening pads (impact dampening pads) involves placing the required pads under the machine base holes, screwing in the bolts, lowering the machine, and individually inflating compressed air into the pads to elevate them. After confirming that the bolts and the walls of the base holes are secure, tighten the nuts. Continue inflating compressed air to elevate the machine by 10-20mm individually. Then, inflate and adjust to level the machine.