Dongyongyuan Machinery Co., Ltd. Damping Case Study: Commissioned client, Dongguan Daxiu Embroidery Factory Wool Weaving Factory. Damping Solution Background: The embroidery factory is located on the third floor of the factory, with a total of 20 embroidery machines, including 13 of the Yamei embroidery machines and 7 of the Chuanyue embroidery machines. The average working speed of each embroidery machine is 700 rpm, and each machine has installed ordinary rubber shock absorbers and cross beams under each support point. However, there is still noticeable vibration from the ground and wall glass inside the embroidery workshop, with significant vibrations on both the upper and lower floors of the workshop, and the noise is so great that it affects their normal work. Moreover, according to the client's feedback, the excessive vibration has severely affected the working efficiency of the embroidery machines, which could originally operate at 1000 rpm but can now only勉强 run at 700 rpm. Increasing the speed results in a significant increase in broken threads and needles, and the floors vibrate even more. Air cushion shock absorbers, press brake shock absorbers, high-floor machine shock absorbers -- Dongyongyuan Pneumatic Shock Absorbers (Product descriptions are owned by Dongyongyuan Machinery Co., Ltd., and unauthorized reproduction is prohibited!). Equipment Name: Embroidery Machine, Equipment Weight: 7-8 tons, Working Speed: 700 rpm, Equipment Support Points: 13, Operation: Vertical. (Product descriptions are owned by Dongyongyuan Machinery Co., Ltd., and unauthorized reproduction is prohibited!). Damping Solution: Install DOYU-2000-CN shock absorbers on the four large support points around the embroidery machines, and DOYU-900-CN shock absorbers on the nine small support points in the middle, adjusting the horizontal position of the embroidery machine through the pressure of the air cushion. After installing Dongyongyuan shock absorbers, the following effects were achieved: 1. The vibration on the same floor and the floor below is no longer noticeable. 2. The vibration of the embroidery machine itself has decreased. 3. The speed of the embroidery machine after installing Dongyongyuan shock absorbers has increased significantly. So what should you do if there is vibration and cracking on the floors? Find Dongyongyuan! Dongyongyuan Machinery provides anti-vibration and shock absorption solutions to customers for machine vibration and noise caused by vibration on lower floors.