| Project | Unit | GX32-50CNC | GX32-75CNC | GX20-100CNC |
| Direct Cut with Skew Angle | Direct Cut with Diagonal Edges | Direct Cut with Skew Angle |
| Processing Capacity | Maximum turning diameter of the workbench | Φ350mm |
| Processing capacity | Center distance between two apical centers | 500mm | 750mm | 1000mm |
| Maximum Grinding Diameter | Φ320mm |
| Center Height | 180mm |
| Maximum load of two cores | 150kg |
| Grinding Wheel Size | Diameter x Width x Inner Hole Diameter | 600x75x305mm |
| Grinding wheel size | Grinding Wheel RPMs | 1430/1910rpm |
| Grinding Wheel Linear Speed | 45/60m/s |
| Grinding Wheel Stand (X-axis) | Rapid Feed Speed | 12M/min |
| Grinding wheel holder (X-axis) | Feed Angle | 30° |
| Minimum unit feed | 0.001mm |
| Feed stroke | 275mm |
| Spindle Head Mount (Servo) | Apical taper | MT5 |
| Spindle Speed (Apical Taper) | 20～600rpm |
| Spindle Type | Centering or Live Center |
| Tailstock (Air Floating) | Apical taper | MT5 |
| Tailstock (air flotation) | Action stroke | 60mm |
| Spindle Type | Fixed or adjustable stroke |
| Workbench (Z-axis) | Rapid Feed Speed | 12M/min |
| Workbench (Z-axis) | Table Stroke | 550mm | 800mm | 1050mm |
| Minimum unit feed | 0.001mm |
| Rotation Angle | ±7° |
| Motor | Grinding Wheel Spindle Motor | 11KW |
| Spindle Head Rest (Servo) Motor | 10Nm |
| Grinding Wheel Holder (X-axis) (Servo) Motor | 18.6Nm |
| Workbench (Z-axis) (servo) motor | 18.6Nm | 28.4Nm |
| Grinding Fluid Pump | 1.1KW |
| Hydraulic Pump | 0.4KW |
| Sliding Surface Lubrication Pump | 0.06KW |
| Grinding Wheel Shaft Lubrication Pump | 0.75KW |
| Box volume | Grinding Fluid Tank | 180L |
| Box volume | Hydraulic Oil Reservoir | 20L |
| Grinding Wheel Shaft Lubrication Box | 100L |
| Sliding Surface Lubrication Box | 5L |
| Machine Tool Precision | Processing Roundness | ≤0.001mm | ≤0.002mm |
| Machine tool accuracy | Dimension Consistencynal consistency） | ≤0.004mm |
| Surface Roughness | Ra0.2um |
| X-axis repeat positioning accuracyning accuracy） | ≤0.0015mm |
| Z-axis repeated positioning accuracyning accuracy） | ≤0.0025mm |
| Executive Standards | JB/T9914-1999 |
