MW1432B External Cylindrical Grinding Machine

Application and Features:
The MW1432B model is an improved type that combines the advantages of the M131W and M1432A, featuring a manual, electrical, and hydraulic controlled external cylindrical grinder.
2. The machine tool's bed rigidity and thermal deformation are superior to M1432A. The worktable is lubricated with a small hole throttle unload design. The spindle of the abrasive wheel carriage is thickened, the motor power is increased, the oil bath temperature rise of the abrasive wheel carriage is reduced, and the grinding efficiency is higher.
3. The longitudinal movement of the machine tool's worktable, the rapid forward and backward movement of the wheel架, and the automatic periodic feeding of the abrasive wheel are all controlled by operating buttons, electricity, and hydraulics. The machine tool features a manual worktable mechanism, a manual lateral feeding mechanism for the abrasive wheel架, and a hydraulic foot pedal device for the tailstock tip retraction.
4. The headstock can be adjusted to any angle within a 90-degree range in the counterclockwise direction. By adjusting the angle of the swing headstock, workbench, or grinding wheel stand, different taper angles of internal and external conical workpieces can be ground. Lowering the inner circle grinding tool bracket on the grinding wheel stand housing allows for the grinding of inner circle parts. It comes with 6 sets of inner circle grinding rods for selection and use.
5. Workpieces, outer diameter grinding wheels, inner diameter grinding wheels, hydraulic pumps, and cooling pumps are each driven by independent motors.
6. The machine tools are equipped with an electrical and hydraulic interlock mechanism for all moving parts, ensuring safe and secure operation. The outer and inner cylindrical grinding wheels are fitted with reliable safety guards.

External Cylindrical Grinding Machine Technical Parameters: