Product Introduction

The three-phase converter adopts imported high magnetic conductivity materials, with exquisite design, small size, strong resistance to electric power, and convenient use.

This series of high current generators is a necessary equipment for various industries that require high current places in electrical debugging, and is applied in power plants, substations, electrical manufacturing plants, scientific research, laboratories and other units.

It belongs to the short-term or intermittent working system and has the characteristics of small size, light weight, and good performance. It is suitable for current load testing and temperature rise testing of 50HZ switches, current transformers, and other electrical equipment.

This series of products consists of two parts: the control panel and the current regulator. It has features such as stepless adjustment of output current, stable current rise, wide range of load changes, reliable operation, and easy and safe operation.

Can be used as a current source equipment for current or temperature rise tests in industrial and mining enterprises.

Equipped with a transformer, it can easily read the test current value.

Product nickname:

Booster, booster principle, through-hole booster, booster price, 1000a series parallel booster, power metering high current booster, 220V booster manufacturer, high current booster, current transformer with booster

Product Features

A. Lightweight and strong carrying capacity!

B. Output current: three-phase balanced, waveform is a standard sine wave

C. Three phase synchronization and individual adjustment for each phase are both possible

Note: Three phase current booster (can increase current according to user requirements).

Features:

(1) Imported iron core has a small weight

(2) 0.5 level digital true effective value header

(3) No need for external standard CT and ammeter

(4) Coarse and fine adjustment of zero position indicator power supply 220/380/66V

The high current generator adopts an energy-saving high permeability current regulator, and the instrument indicates a true effective value of 0.5 level digital meter.

Equipped with a digital stopwatch, it can meet the requirements of time measurement. It has the characteristics of high output power, strong overload resistance, clear reading, and flexible movement.

Suitable for power system technicians to inspect current transformers, protection devices, and secondary circuit current tests.

Precautions for use:

(1) When newly installed or not used for a long time, measure the insulation resistance between coils and between coils and ground with a 1500 megohmmeter before operation. Only when the resistance value is not less than 0.5 megohms can it be used.

(2) The use of intermediate current transformers and operating consoles must be reliably grounded to ensure safety.

(3) When using, the flow should be slowly and evenly raised, and excessive vibration should be avoided during transportation.

(4) The contact surface between the voltage regulator and the electric brush should be kept clean, and wiped clean with 90% alcohol dipped cotton yarn depending on the situation.

(5) This equipment should be kept clean, ventilated, dry, and stored indoors.

Technical Specifications

1) Input AC 50Hz 380V * 3

2) Balanced output 0-customer demand - three-phase AC high current; Smooth, stable, and continuously adjustable, with an accuracy higher than level 0.5; The output current is a standard sine wave

3) Output current mode: True RMS continuously adjustable

4) Output waveform: Standard sine wave

5) Output open voltage: ≥ 6V

6) Current stability: 0.2%.

7) The THD 1% design standard for current waveform distortion is much higher than the national standard<>.

8) Protection settings for overcurrent and overvoltage

9) Insulation withstand voltage 1800/AC 1MIN, insulation grade: Class B

10) Can measure the current action time of the tested component. And it can synchronously record the locking action time. Automatic discrimination of normally open and normally closed contacts. Time measurement range: 0.001S -9999.999 S accuracy; 0.001S (optional)

11) Advanced microcontroller control technology is adopted in the design, making the instrument easy and convenient to operate during use. Throughout the entire testing process, the performance was reliable and stable, with intuitive and fast readings. The application of high-precision sensors effectively ensures the accuracy of test data. The whole machine testing unit includes: high-precision millisecond meter, true effective value ammeter, current sensor (imported parts), voltage regulator, high-power current booster (imported materials), microcomputer controller, printing function (optional function) and other parts.

12) Working environment -10 ℃ -60 ℃

13) Weight: 12-15 KG

Equipment completeness