Product Features

Which Wuhan RFA series return oil filter manufacturer offers affordable prices? The function of the return oil pipeline located at the end of the system is to filter out pollutants generated or invaded in the system before returning to the oil tank. Therefore, it is one of the important filters for controlling system pollution cleanliness. Although it is a low-pressure pipeline, pulsation or pressure shock may occur depending on the operating condition of the transmission device, so the material and strength of the components should be fully considered. Set up a filter pollution transmitter and an oil circuit bypass valve to improve the reliability of the hydraulic system; When the filter element is blocked by pollutants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35Mpa, the signaling device will send a signal indication. The filter element should be replaced or the oil temperature should be increased in a timely manner. When it is not possible to immediately shut down and deal with these faults, the bypass valve located at the bottom of the filter element will automatically open (the opening pressure of the bypass valve is 0.4Mpa) to protect the normal operation of the filter and hydraulic system.

Product actual photos