ZXQ 500Automatic镶嵌Machine
The ZXQ 500 automatic inlaid machine is suitable for inlaying micro, hand-unfriendly, or irregular metallographic and petrographic specimens, facilitating their cutting, grinding, and polishing for subsequent metallographic, spectral, or hardness testing. During the sample preparation process, the machine controls a series of actions including automatic heating, pressure application, and cooling to subsequent automatic pressure release and shutdown through CPU programming, achieving user-friendly, simple, and efficient operation. The ZXQ 500 automatic inlaid machine is an ideal sample preparation equipment for laboratories in colleges and industrial and mining enterprises.
1.1 Working Principle
◆ Motor-driven gear, driving the screw and other components, causing the lower mold to move upwards.
◆ Squeezed and filled inlay material, followed by a force squeezing spring.
◆ When the spring is compressed to the limit switch position, the pressure-holding timer begins. As the inlay material melts, the spring will continue to compress until the pressure-holding time ends.
1.2 Range of Embedded Powder Selection
The selection range for embedded powder on this machine is limited to thermosetting materials (such as general type, edge-retaining type, and conductive type embedded powder).
Pressing temperatures for different thermosetting materials can be adjusted and set according to the material.
Detailed specifications
ZXQ 500Automatic镶嵌Machine | |
Sample compression diameter | φ22, φ30, φ45 in three sizes (one standard configuration, select upon ordering) |
Heating Temperature Range | 100-200 ℃ |
Delay range before pressurization | 0-999s |
Maintain time frame | 0-999s |
Cooling temperature range | 20-90℃ |
Heating Power | 600 W |
Input Power | Single-phase AC220V 50Hz |
Dimensions and appearance | 350 mm×450 mm×470 mm |
Net Heavy | 45Kg |
Panel Operation Instructions
