Product Introduction
This product is meticulously crafted using a special water-based high polymer adhesive material, blended with fluorinated lubricants, and fortified with various solid additives such as nanometer-sized fluorinated lubricants.
Performance Features
Excellent dry lubrication properties and extreme pressure resistance.
Excellent oxidation stability;
Excellent mechanical stability and protective properties.
Excellent adhesion properties.
Smokeless, non-toxic, and pollution-free during use, meets environmental protection standards.
Recommended Applications
Various mold lubrication and demolding.
Operating Temperature: -50℃~400℃
Packaging Format
1 lb/can, 5 lbs/drum, 18 lbs/drum, 180 lbs/drum
Technical Specifications
Appearance | Viscous liquid |
Color | Charcoal gray |
Category | Water-based |
Density/g·cm-3 | 1.20~1.23 |
pH Level | 6.0~8.0 |
Coating | 5μm -40μm |
Usage Instructions
In a room temperature, high humidity, well-ventilated environment, clean the workpiece surface of rust, oil, and dirt. Apply the coating to the object's surface using dipping, spraying, or other methods, then allow it to dry naturally or dry with machinery (refer to "Lubricating Coating Operation Specification" for details).
Storage Conditions
Store sealed at room temperature, avoid direct sunlight, and prevent moisture and impurities from mixing in.
Cautionary Notes
The workplace must be well-ventilated, and protective equipment must be worn while working.
